8.
Press Esc to return to the System BIOS screen. Press Esc again.
A message prompts you to save the changes.
NOTE: Password protection does not take effect until the system reboots.
Using your system password to secure your system
About this task
If you have assigned a setup password, the system accepts your setup password as an alternate system
password.
Steps
1.
Turn on or reboot your system.
2.
Type your system password and press Enter.
Next steps
When
Password Status
is set to
Locked
, type the password and press Enter when prompted at reboot.
NOTE: If an incorrect system password is typed, the system displays a message and prompts you to
reenter your password. You have three attempts to type the correct password. After the third
unsuccessful attempt, the system displays an error message that the system stops functioning and
must be turned off.
Even after you turn off and restart the system, the error message is displayed until the correct
password is entered.
Deleting or changing system password and setup
password
Prerequisites
Ensure that the password jumper is
Enabled
and the
Password Status
is set to
Unlocked
before
attempting to delete or change the existing system or setup password.
NOTE: You cannot delete or change an existing system or setup password if the
Password Status
is
set to
Locked
.
Steps
1.
To enter System Setup, press F2 immediately after a turning on or restarting your system.
2.
On the
System Setup Main Menu
screen, click
System BIOS
→
System Security
.
3.
On the
System Security
screen, verify that
Password Status
is set to
Unlocked
.
4.
In the
System Password
field, alter or delete the existing system password, and then press Enter or
Tab.
5.
In the
Setup Password
field, alter or delete the existing setup password, and then press Enter or Tab.
If you change the system and setup password a message prompts you to reenter the new password.
If you delete the system and setup password, a message prompts you to confirm the deletion.
6.
Press Esc to return to the
System BIOS
screen. Press Esc again, and a message prompts you to save
the changes.
7.
Select
Setup Password
, change or delete the existing setup password and press
Enter
or
Tab
.
NOTE: If you change the system password or setup password, a message prompts you to
reenter the new password. If you delete the system password or setup password, a message
prompts you to confirm the deletion.
41
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
