Dell PowerEdge R330 Скачать руководство пользователя страница 138

Страница: 138 / 160

Steps
1.

Re-enter the time and date in System Setup.

Turn off the system, and disconnect it from the electrical outlet for at least an hour.

Reconnect the system to the electrical outlet, and turn on the system.

Enter System Setup.
If the date and time displayed in System Setup are not correct, check the System Error Log (SEL) for
system battery messages.

Next steps

If the problem persists, see

Getting Help

Troubleshooting power supply units

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

Troubleshooting power source problems

Press the power button to ensure that your system is turned on. If the power indicator does not glow

when the power button is pressed, press the power button firmly.

Plug in another working PSU to ensure that the system board is not faulty.

Ensure that no loose connections exist.
For example, loose power cables.

Ensure that the power source meets applicable standards.

Ensure that there are no short circuits.

Have a qualified electrician check the line voltage to ensure that it meets the required specifications.

Power supply unit problems

Ensure that no loose connections exist.
For example, loose power cables.

Ensure that the power supply handle/LED indicates that the power supply is working properly.
For more information on power supply indicators, see

Indicator codes for redundant power supply

unit

If you have recently upgraded your system, ensure that the power supply unit has enough power to

support the new system.

If you have a redundant power supply configuration, ensure that both the power supply units are of

the same type and wattage.
You may have to upgrade to a higher wattage power supply unit.

Ensure that you use only power supply units with the Extended Power Performance (EPP) label on
the back.

Reseat the power supply unit.

NOTE: After installing a power supply unit, allow several seconds for the system to recognize
the power supply unit and determine if it is working properly.

138

Содержание PowerEdge R330

































































































































































Результаты поиска

Содержание PowerEdge R330

Отзывы:

Похожие инструкции для PowerEdge R330

Бренды по названию

Популярные бренды

Dell PowerEdge R330, Руководство пользователя

Результаты поиска

Содержание PowerEdge R330

Отзывы:

Похожие инструкции для PowerEdge R330

Бренды по названию

Популярные бренды