Steps
1.
Lower the cooling fan blank into the cooling fan bracket.
2.
Insert the tabs on the cooling fan blanks into the slots on the cooling fan bracket.
3.
Press the cooling fan blank until it clicks into place.
Next steps
Follow the procedure listed in
After working inside your system
.
Removing a cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The procedure for removing each fan is identical.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
If required, remove the cooling shroud.
Steps
1.
Disconnect the power cable from the power connector on the system board by pressing the sides of
the power cable.
2.
Lift the fan out of the cooling fan bracket.
80
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
