Figure 21. Removing and installing a cabled hard drive carrier
1.
hard drive
2. power/data cable
3. release tab
4. hard drive carrier
Next steps
1.
If required, install a hard drive in the hard drive carrier and install the hard drive carrier into the hard
drive slot in the system.
2.
If you are not replacing the hard drive immediately, insert a hard drive carrier in the empty hard drive
slot.
3.
Follow the procedure listed in
After working inside your system
.
Related Tasks
Installing a 3.5-inch cabled hard drive carrier
Removing a cabled hard drive from a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the cabled hard drive carrier.
4.
Keep the Phillips #2 screwdriver ready.
64
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
