Figure 29. Removing and installing the optical drive
1.
optical drive
2. data cable
3. power cable
4. release tab
Next steps
1.
Depending on your system configuration, install an optical drive or two 1.8-inch solid state drives
(SSDs).
2.
If you are not immediately installing an optical drive or 1.8-inch SSDs, install an optical drive blank.
NOTE: Blanks must be installed on empty optical drive or tape drive slots to maintain FCC
certification of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.
3.
Follow the procedure listed in
After working inside your system
.
Related References
Supported hard drive configurations
Related Tasks
Installing the optional optical drive
Installing the optional 1.8-inch solid state drives
Installing the optional optical drive
The procedure for installing an optical drive and optical drive blank is the same.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
77
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
