Intrusion switch
Removing the intrusion switch
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Disconnect the intrusion switch cable from the connector on the system board.
2.
Remove the cable from the cable routing latch.
3.
Using a plastic scribe, slide the intrusion switch and remove it from under the intrusion switch slot.
Figure 14. Removing and installing the intrusion switch
1.
intrusion switch
2. intrusion switch slot
3. intrusion switch cable
4. intrusion switch connector on the
system board
5. cable routing clip
51
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
