Convention
Indicator pattern
Description
C
Link indicator is yellow
The NIC is connected to a valid network at less than its
maximum port speed.
D
Activity indicator is flashing
green
Network data is being sent or received.
Indicator codes for redundant power supply unit
Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is
present or whether a power fault has occurred.
Figure 8. AC PSU status indicator
1.
AC PSU status indicator or handle
Table 9. Redundant AC PSU status indicator
Convention
Power Indicator
Pattern
Condition
A
Green
A valid power source is connected to the PSU and the PSU is
operational.
B
Flashing green
When the PSU firmware is being updated, the PSU handle flashes
green.
CAUTION: Do not disconnect the power cord or unplug the
PSU when updating firmware. If firmware update is
interrupted, the PSUs will not function. You must roll back the
PSU firmware by using Dell Lifecycle Controller. For more
information, see Dell Lifecycle Controller User’s Guide at
Dell.com/idracmanuals.
C
Flashing green
and turns off
When hot-adding a PSU, the PSU handle flashes green five times at
4 Hz rate and turns off. This indicates that there is a PSU mismatch
19
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
