manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 995

BigIron RX Series Configuration Guide

919

53-1002253-01

Configuring SSH

30

With DSA challenge-response authentication, a collection of clients’ public keys are stored on the 
device. Clients are authenticated using these stored public keys. Only clients that have a private 
key that corresponds to one of the stored public keys can gain access to the device using SSH.

With password authentication, users are prompted for a password when they attempt to log into the 
device (provided empty password logins are not allowed; refer to 

“Enabling empty password logins”

 

on page 919). If there is no user account that matches the user name and password supplied by 
the user, the user is not granted access.

You can deactivate one or both user authentication methods for SSH.  Note that deactivating both 
authentication methods essentially disables the SSH server entirely.

To disable DSA challenge-response authentication.

BigIron RX(config)# ip ssh key-authentication no

Syntax: ip ssh key-authentication yes | no

The default is “yes”.

To deactivate password authentication.

BigIron RX(config)# ip ssh password-authentication no

Syntax: ip ssh password-authentication no | yes

The default is “yes”.

Enabling empty password logins

By default, empty password logins are not allowed. This means that users with an SSH client are 
always prompted for a password when they log into the device. To gain access to the device, each 
user must have a user name and password. Without a user name and password, a user is not 
granted access. Refer to 

“Setting up local user accounts”

 on page 74 for information on setting up 

user names and passwords on the device.

If you enable empty password logins, users are 

not

 prompted for a password when they log in.  Any 

user with an SSH client can log in without being prompted for a password.

To enable empty password logins.

BigIron RX(config)# ip ssh permit-empty-passwd yes

Syntax: ip ssh permit-empty-passwd no | yes

Setting the SSH port number

By default, SSH traffic occurs on TCP port 22.  You can change this port number.  For example, the 
following command changes the SSH port number to 2200.

BigIron RX(config)# ip ssh port 2200

Note that if you change the default SSH port number, you must configure SSH clients to connect to 
the new port. Also, you should be careful not to assign SSH to a port that is used by another 
service. If you change the SSH port number, Brocade recommends that you change it to a port 
number greater than 1024.

Syntax: ip ssh port 

<number>

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды