manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 165

BigIron RX Series Configuration Guide

89

53-1002253-01

Configuring TACACS and  security

4

Syntax: tacacs-server host <ip-addr> | ipv6<ipv6-addr>  | <server-name> [auth-port <number> 

[authentication-only | authorization-only | accounting-only | default] [key <string>]]

The default parameter causes the server to be used for all AAA functions.  

After authentication takes place, the server that performed the authentication is used for 
authorization or accounting.  If the authenticating server cannot perform the requested function, 
then the next server in the configured list of servers is tried; this process repeats until a server that 
can perform the requested function is found, or every server in the configured list has been tried.

Setting optional TACACS and parameters

You can set the following optional parameters in a TACACS and configuration:

•

 key – This parameter specifies the value that the Brocade device sends to the 
 server when trying to authenticate user access.

•

Retransmit interval – This parameter specifies how many times the Brocade device will resend 
an authentication request when the TACACS and  server does not respond. The 
retransmit value can be from 1 – 5 times. The default is 3 times.

•

Dead time – This parameter specifies how long the Brocade device waits for the primary 
authentication server to reply before deciding the server is dead and trying to authenticate 
using the next server. The dead-time value can be from 1 – 5 seconds. The default is 3 
seconds.

•

Timeout – This parameter specifies how many seconds the Brocade device waits for a 
response from a TACACS and server before either retrying the authentication request, 
or determining that the TACACS and servers are unavailable and moving on to the 
next authentication method in the authentication-method list. The timeout can be from 1 – 15 
seconds. The default is 3 seconds.

Setting the key

The key parameter in the tacacs-server command is used to encrypt  packets before they 
are sent over the network. The value for the key parameter on the device should match the one 
configured on the  server. The key can be from 1 – 32 characters in length and cannot 
include any space characters.

NOTE

The tacacs-server key command applies only to  servers, not to TACACS servers. If you are 
configuring TACACS, do not configure a key on the TACACS server and do not enter a key on the 
device.

To specify a server key, enter the following command.

BigIron RX(config)# tacacs-server key rkwong

Syntax: tacacs-server key [0 | 1]  <string>

BigIron RX(config)# tacacs-server host 1.2.3.4 auth-port 49 authentication-only

key abc

BigIron RX(config)# tacacs-server host 1.2.3.5 auth-port 49 authorization-only

key def

BigIron RX(config)# tacacs-server host 1.2.3.6 auth-port 49 accounting-only

key ghi

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды