Dell BigIron RX Series, Руководство по настройке

Страница: 1097 / 1458

BigIron RX Series Configuration Guide 1021
53-1002253-01
Defining SNMP views
36
You can create up to 10 views on the device. This number cannot be changed.
To create an SNMP view, enter one of the following commands:
BigIron RX(config)# snmp-server view Maynes system included
BigIron RX(config)# snmp-server view Maynes system.2 excluded
BigIron RX(config)# snmp-server view Maynes 2.3.*.6 included
BigIron RX(config)# write mem
NOTE
The snmp-server view command supports the MIB objects as defined in RFC 1445.
Syntax: [no] snmp-server view < name > < mib-tree > included | excluded
The < name > parameter can be any alphanumeric name you choose to identify the view. The
names cannot contain spaces.
The < mib_tree > parameter is the name of the MIB object or family. MIB objects and MIB sub-trees
can be identified by a name or by the numbers called Object Identifiers (OIDs) that represent the
position of the object or sub-tree in the MIB hierarchy. You can use a wildcard (*) in the numbers to
specify a sub-tree family.
The included | excluded parameter specifies whether the MIB objects identified by the
<
mib_family > parameter are included in the view or excluded from the view.
NOTE
All MIB objects are automatically excluded from any view unless they are explicitly included;
therefore, when creating views using the snmp-server view command, indicate which portion of the
MIB you want users to access.
For example, you may want to assign the view called “admin” a community string or user group. The
“admin” view will allow access to the Brocade MIBs objects that begin with the 1.3.6.1.4.1.1991
object identifier. Enter the following command.
BigIron RX
(config)# snmp-server view admin 1.3.6.1.4.1.1991 included
You can exclude portions of the MIB within an inclusion scope. For example, if you want to exclude
the snAgentSys objects, which begin with 1.3.6.1.4.1.1991.1.1.2 object identifier from the admin
view, enter a second command such as the following.
BigIron RX
(config)# snmp-server view admin 1.3.6.1.4.1.1991.1.1.2 excluded
Note that the exclusion is within the scope of the inclusion.
To delete a view, use the no parameter before the command.
SNMP v3 configuration examples
The examples below shows how to configure SNMP v3.