manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 700

624

BigIron RX Series Configuration Guide

53-1002253-01

Displaying PIM Sparse configuration information and statistics

23

This field...

Displays...

(<source>, <group>

)

The comma-separated values in parentheses is a source-group pair. 
The

 <source> 

is the PIM source for the multicast 

<group>

. For example, 

the following entry means source 209.157.24.162 for group 
239.255.162.1: (209.157.24.162,239.255.162.1) 
If the 

<source> 

value is * (asterisk), this cache entry uses the RP path. 

The * value means “all sources”. 
If the 

<source>

 is a specific source address, this cache entry uses the 

SPT path.

RP

<ip-addr>

Indicates the RP for the group for this cache entry.
NOTE: The RP address appears only if the RPT flag is set to 1 and the 

SPT flag is set to 0 (see below). 

forward port

The port through which the BigIron RX reaches the source. 

Count

The number of packets forwarded using this cache entry.

Sparse Mode

Indicates whether the cache entry is for regular PIM (dense mode) or 
PIM Sparse. This flag can have one of the following values:

•

0 – The entry is not for PIM Sparse (and is therefore for the dense 
mode of PIM). 

•

1– The entry is for PIM Sparse. 

RPT

Indicates whether the cache entry uses the RP path or the SPT path. The 
RPT flag can have one of the following values:

•

0 – The SPT path is used instead of the RP path. 

•

1– The RP path is used instead of the SPT path.

NOTE: The values of the RP and SPT flags are always opposite (one is 

set to 0 and the other is set to 1).

SPT

Indicates whether the cache entry uses the RP path or the SPT path. The 
SP flag can have one of the following values:

•

0 – The RP path is used instead of the SPT path. 

•

1– The SPT path is used instead of the RP path.

NOTE: The values of the RP and SPT flags are always opposite (one is 

set to 0 and the other is set to 1).

Register Suppress

Indicates whether the Register Suppress timer is running. This field can 
have one of the following values:

•

0 – The timer is not running.

•

1 – The timer is running.

member ports

Indicates the BigIron RX physical ports to which the receivers for the 
source and group are attached. The receivers can be directly attached or 
indirectly attached through other PIM Sparse routers.

virtual ports

Indicates the virtual interfaces to which the receivers for the source and 
group are attached. The receivers can be directly attached or indirectly 
attached through other PIM Sparse routers.

prune ports

Indicates the physical ports on which the BigIron RX has received a 
prune notification (in a Join/Prune message) to remove the receiver 
from the list of recipients for the group.

virtual prune ports

Indicates the virtual interfaces ports on which the BigIron RX has 
received a prune notification (in a Join/Prune message) to remove the 
receiver from the list of recipients for the group.

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды