manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1093

BigIron RX Series Configuration Guide

1017

53-1002253-01

Configuring your NMS

36

Syntax: [no] snmp-server group <

groupname

> 

 v1 | v2c | v3 
auth | noauth | priv
[access <

standard-acl-id

>] [read <

viewstring

>] [write <

viewstring

>] 

NOTE

This command is not used for SNMP version 1 and SNMP version 2. In these versions, groups and 
group views are created internally using community strings. (Refer to 

“Establishing SNMP 

community strings”

 on page 1013.) When a community string is created, two groups are created, 

based on the community string name. One group is for SNMP version 1 packets, while the other is 
for SNMP version 2 packets.

The group <

groupname

> parameter defines the name of the SNMP group to be created. 

The v1, v2c, or v3 parameter indicates which version of SNMP is used.  In most  cases, you will be 
using v3, since groups are automatically created in SNMP versions 1 and 2 from community 
strings.

The auth | noauth parameter determines whether or not authentication will be required to access 
the supported views. If auth is selected, then only authenticated packets are allowed to access the 
view specified for the user group.  Selecting noauth means that no authentication is required to 
access the specified view. Selecting priv means that an authentication password will be required 
from the users. 

The auth | noauth | priv parameter is available when you select v3, not v1 or v2. 

The access <

standard-acl-id

> parameter is optional. It allows incoming SNMP packets to be filtered 

based on the standard ACL attached to the group.

The read <

viewstring

> | write <

viewstring

> parameter is optional.  It indicates that users who 

belong to this group have either read or write access to the MIB. 

The <

viewstring

> variable is the name of the view to which the SNMP group members have access.  

If no view is specified, then the group has no access to the MIB.

 The value of <

viewstring

> is defined using the snmp-server view command.  The SNMP agent 

comes with the "all" view, the default view that provides access to the entire MIB; however, it must 
be specified when creating the group.  The "all" view also allows SNMP version 3 to be backwards 
compatibility with SNMP version 1 and version 2. 

NOTE

If you will be using a view other than the "all" view, that view must be configured before creating the 
user group. Refer to 

“Defining SNMP views”

 on page 1020, especially for details on the include | 

exclude parameters.

Defining an SNMP user account

The snmp-server user command does the following:

•

Creates an SNMP user.

•

Defines the group to which the user will be associated.

•

Defines the type of authentication to be used for SNMP access by this user.

•

Specifies one of the following encryption types used to encrypt the privacy password:

•

Data Encryption Standard (DES) – A symmetric-key algorithm that uses a 56-bit key. 

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды