manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1011

BigIron RX Series Configuration Guide

935

53-1002253-01

Configuring multi-device port authentication

31

Disabling aging for authenticated MAC addresses

MAC addresses that have been authenticated or denied by a RADIUS server are aged out if no 
traffic is received from the MAC address for a certain period of time.  

•

Authenticated MAC addresses or non-authenticated MAC addresses that have been placed in 
the restricted VLAN are aged out if no traffic is received from the MAC address over the 
device’s normal MAC aging interval.  

•

Non-authenticated MAC addresses that are blocked by the device are aged out if no traffic is 
received from the address over a fixed hardware aging period (70 seconds), plus a 
configurable software aging period. (See the next section for more information on configuring 
the software aging period).

You can optionally disable aging for MAC addresses subject to authentication, either for all MAC 
addresses or for those learned on a specified interface.

To disable aging for all MAC addresses subject to authentication on all interfaces where 
multi-device port authentication has been enabled, enter the following command.

BigIron RX(config)# mac-authentication disable-aging

To disable aging for all MAC addresses subject to authentication on a specific interface where 
multi-device port authentication has been enabled, enter commands such as the following.

BigIron RX(config)# interface e 3/1

BigIron RX(config-if-e100-3/1)# mac-authentication disable-aging

Syntax: [no] mac-authentication disable-aging [denied-mac-only  | permitted-mac-only]

denied-mac-only disables aging of denied sessions and enables aging of permitted sessions.

permitted-mac-only disables aging of permitted (authenticated and restricted) sessions and 
enables aging of denied sessions.

Specifying the aging time for blocked MAC addresses

When the device is configured to drop traffic from non-authenticated MAC addresses, traffic from 
the blocked MAC addresses is dropped in hardware, without being sent to the CPU. A Layer 2 CAM 
entry is created that drops traffic from the blocked MAC address in hardware. If no traffic is 
received from the blocked MAC address for a certain amount of time, this Layer 2 CAM entry is 
aged out. If traffic is subsequently received from the MAC address, then an attempt can be made to 
authenticate the MAC address again.

Aging of the Layer 2 CAM entry for a blocked MAC address occurs in two phases, known as 

hardware aging

 and 

software aging

.  The hardware aging period is fixed at 70 seconds and is 

non-configurable.  The software aging time is configurable through the CLI.

Once the device stops receiving traffic from a blocked MAC address, the hardware aging begins 
and lasts for a fixed period of time. After the hardware aging period ends, the software aging period 
begins. The software aging period lasts for a configurable amount of time (by default 120 seconds). 
After the software aging period ends, the blocked MAC address ages out, and can be authenticated 
again if the device receives traffic from the MAC address.

To change the length of the software aging period for blocked MAC addresses, enter a command 
such as the following.

BigIron RX(config)# mac-authentication max-age 180

Syntax: [no] mac-authentication max-age 

<seconds>

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды