Dell BigIron RX Series, Руководство по настройке

Страница: 473 / 1458

BigIron RX Series Configuration Guide 397
53-1002253-01
Displaying RSTP information
13
Displaying RSTP information for the specified Ethernet interface
To display the RSTP information for the specified Ethernet interface, enter the following command
at any level of the CLI.
ActiveTimers Shows what timers are currently active on this port and the number of
seconds they have before they expire:
•
rrWhile – Recent root timer. A non-zero value means that the port has
recently been a Root port.
•
rcvdInfoWhile – Received information timer. Shows the time remaining
before the information held by this port expires (ages out). This timer is
initialized with the effective age parameter. (See
“Max Age” on
page 394.)
•
rbWhile – Recent backup timer. A non-zero value means that the port
has recently been a Backup port.
•
helloWhen – Hello period timer. The value shown is the amount of time
between hello messages.
•
tcWhile – Topology change timer. The value shown is the interval when
topology change notices can be propagated on this port.
•
fdWhile – Forward delay timer. (See the explanation for Fwd Dly on
page 394 .)
•
mdelayWhile – Migration delay timer. The amount of time that a bridge
on the same LAN has to synchronize its migration state with this port
before another BPDU type can cause this port to change the BPDU that
it transmits.
Machine States The current states of the various state machines on the port:
•
PIM – State of the Port Information state machine.
•
PRT – State of the Port Role Transition state machine.
•
PST – State of the Port State Transition state machine.
•
TCM – State of the Topology Change state machine.
•
PPM – State of the Port Protocol Migration.
•
PTX – State of the Port Transmit state machine.
Refer to the section “State machines” on page 362 for details on state
machines.
Received Shows the number of BPDU types the port has received:
•
RST BPDU – BPDU in RSTP format.
•
Config BPDU – Legacy configuration BPDU (802.1D format).
•
TCN BPDU – Legacy topology change BPDU (802.1D format).
TABLE 81 The show rstp detail command output (Continued)
This field... Displays...