manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 124

48

BigIron RX Series Configuration Guide

53-1002253-01

Flash memory and PCMCIA flash card file management commands

3

Renaming a file

You can rename a file in the management module’s flash memory or on a flash card inserted in the 
management module’s slot 1 or slot 2 using the rename or mv command.

The software attempts to rename the file in the file system that has the current management 
focus. By default, flash memory has the management focus. However, you do not need to change 
the focus to rename the file in a file system that does not currently have management focus. In this 
case, you can specify the /<directory>/<old-file-name> /<directory>/<new-file-name> parameter 
with the rename or mv command to rename the file in the desired file system. 

For example, to rename a file in flash memory, if flash memory has the current management focus, 
enter a command such as the following:.

BigIron RX# rename oldname newname

If the command is successful, the CLI displays a new command prompt.

Syntax: rename | mv [/<directory>/]<old-file-name> [/<directory>/]<new-file-name>

You can enter either rename or mv for the command name.

The /<directory>/ parameter specifies a directory in a file system that does not have current 
management focus.

The <old-file-name> parameter specifies the original filename that you want to change.

The <new-file-name> parameter specifies the new filename that you want to assign to the original 
file.

For example, to rename a file on the flash card inserted in slot 2, if flash memory has the current 
management focus, enter a command such as the following.

BigIron RX# rename /slot2/oldname /slot2/newname

Changing the read-write attribute of a file

You can specify the read-write attribute of a file on a flash card as follows: 

•

Read-only – You can display or copy the file but you cannot replace (copy over) or delete the 
file. 

•

Read-write – You can replace (copy over) or delete the file. This is the default.

NOTE

The read-write attribute of all files in flash memory is set to read-write. You cannot change this 
attribute for the files in flash memory. Therefore, the attrib command does not apply to the flash 
memory file system.

To determine the current setting of the read-write attribute for a file, use the dir command to list the 
directory information for the file. Files set to read-only are listed with “R” in front of the file name. 
For information about the dir command, refer to 

“Displaying a directory of the files”

 on page 42.

The software attempts to change the read-write attribute of the file in the file system that has the 
current management focus. By default, flash memory has the management focus. However, you do 
not need to change the focus to change this attribute of the file in a file system that does not 
currently have management focus. In this case, you can specify the slot1 or slot2 keyword with the 
attrib command to change the attribute of the file in the desired file system. 

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды