manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 664

588

BigIron RX Series Configuration Guide

53-1002253-01

IGMP v3

23

In response to membership reports from the interfaces, the router sends a Group-Specific or a 
Group-and-Source Specific query to the multicast interfaces.  For example, a router receives a 
membership report with a Source-List-Change record to block old sources from an interface. The 
router sends Group-and-Source Specific Queries to the source and group (S,G) identified in the 
record. If none of the interfaces is interested in the (S,G), it is removed from (S,G) list for that 
interface on the router.

Each IGMP V3-enabled router maintains a record of the state of each group and each physical port 
within a virtual routing interface. This record contains the group, group-timer, filter mode, and 
source records information for the group or interface. Source records contain information on the 
source address of the packet and source timer. If the source timer expires when the state of the 
group or interface is in Include mode, the record is removed. 

Default IGMP version

IGMP V3 is available for BigIron RX Switches; however, these devices are shipped with IGMP 
V2-enabled. You must enable IGMP V3 globally or per interface.

Also, you can specify what version of IGMP you want to run on a device globally, on each interface 
(physical port or virtual routing interface), and on each physical port within a virtual routing 
interface. If you do not specify an IGMP version, IGMP V2 will be used. 

Compatibility with IGMP V1 and V2

Different multicast groups, interfaces, and routers can run their own version of IGMP. Their version 
of IGMP is reflected in the membership reports that the interfaces send to the router. Routers and 
interfaces must be configured to recognized the version of IGMP you want them to process. 

An interface or router sends the queries and reports that include its IGMP version specified on it. It 
may recognize a query or report that has a different version. For example, an interface running 
IGMP V2 can recognize IGMP V3 packets, but cannot process them. Also, a router running IGMP V3 
can recognize and process IGMP V2 packet, but when that router sends queries to an IGMP V2 
interface, the downgraded version is supported, no the upgraded version.  

If an interface continuously receives queries from routers that are running versions of IGMP that 
are different from what is on the interface, the interface logs warning messages in the syslog every 
five minutes. Reports sent by interfaces to routers that contain different versions of IGMP do not 
trigger warning messages; however, you can see the versions of the packets using the show ip igmp 
traffic command. 

The version of IGMP can be specified globally, per interface (physical port or virtual routing 
interface), and per physical port within a virtual routing interface. The IGMP version set on a 
physical port within a virtual routing interface supersedes the version set on a physical or virtual 
routing interface. Likewise, the version on a physical or virtual routing interface supersedes the 
version set globally on the device. The sections below present how to set the version of IGMP. 

Globally enabling the IGMP version

To globally identify the IGMP version on a Brocade device, enter the following command.

BigIron RX(config)# ip igmp version 3

Syntax: ip igmp version 

<version-number>

Enter 1, 2, or 3 for 

<version-number>

. Version 2 is the default version.

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды