manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1047

BigIron RX Series Configuration Guide

971

53-1002253-01

Configuring 802.1x port security

33

Configuring an authentication method list for 802.1x

To use 802.1x port security, you must specify an authentication method to be used to authenticate 
Clients. Brocade supports RADIUS authentication with 802.1x port security. To use RADIUS 
authentication with 802.1x port security, you create an authentication method list for 802.1x and 
specify RADIUS as an authentication method, then configure communication between the BigIron 
RX and RADIUS server.

For example.

BigIron RX(config)# aaa authentication dot1x default radius

Syntax: [no]aaa authentication dot1x default 

<method-list>

For the 

<method-list>

, enter at least one of the following authentication methods.

radius – Use the list of all RADIUS servers that support 802.1x for authentication.

none – Use no authentication. The Client is automatically authenticated without the device using 
information supplied by the Client.

NOTE

If you specify both radius and none, make sure radius comes before none in the method list.

Setting RADIUS parameters

To use a RADIUS server to authenticate access to a BigIron RX, you must identify the server to the 
BigIron RX. For example.

BigIron RX(config)# radius-server host 209.157.22.99 auth-port 1812 acct-port 

1813 default key mirabeau dot1x

Syntax: radius-server host 

<ip-addr>

 | 

<server-name>

 [auth-port 

<number>

 acct-port 

<number>

 

[authentication-only | accounting-only | default [key 0 | 1 

<string>

 [dot1x]]] ]

The host 

<ip-addr>

 | 

<server-name>

 parameter is either an IP address or an ASCII text string.

The auth-port 

<number>

 parameter specifies what port to use for RADIUS authentication.

The acct-port 

<number>

 parameter specifies what port to use for RADIUS accounting.

The dot1x parameter indicates that this RADIUS server supports the 802.1x standard.  A RADIUS 
server that supports the 802.1x standard can also be used to authenticate non-802.1x 
authentication requests.

NOTE

To implement 802.1x port security, at least one of the RADIUS servers identified to the BigIron RX 
must support the 802.1x standard.

Supported RADIUS attributes
Many IEEE 802.1x Authenticators will function as RADIUS clients. Some of the RADIUS attributes 
may be received as part of IEEE 802.1x authentication. The BigIron RX supports the following 
RADIUS attributes for IEEE 802.1x authentication:

•

Username (1) – RFC 2865

•

FilterId (11) –  RFC 2865

•

Vendor-Specific Attributes (26) – RFC 2865 

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды