manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1002

926

BigIron RX Series Configuration Guide

53-1002253-01

How multi-device port authentication works

31

Authentication-failure actions

If the MAC address does not match the username and password of an entry in the users database 
on the RADIUS server, then the RADIUS server returns an Access-Reject message. When this 
happens, it is considered an authentication failure for the MAC address. When an authentication 
failure occurs, the device can either drop traffic from the MAC address in hardware (the default), or 
move the port on which the traffic was received to a restricted VLAN.

BigIron RX Series support multi-device port authentication on both tagged and untagged ports.

Supported RADIUS attributes

The BigIron RX supports the following RADIUS attributes for multi-device port authentication:

•

Username (1) – RFC 2865

•

FilterId (11) –  RFC 2865

•

Vendor-Specific Attributes (26) – RFC 2865 

•

Tunnel-Type (64) – RFC 2868 

•

Tunnel-Medium-Type (65) – RFC 2868 

•

EAP Message (79) – RFC 2579 

•

Tunnel-Private-Group-Id (81) – RFC 2868

Dynamic VLAN and ACL assignments 

The multi-device port authentication feature supports 

dynamic VLAN assignment

, where a port can 

be placed in a VLAN based on the MAC address learned on that interface. When a MAC address is 
successfully authenticated, the RADIUS server sends the device a RADIUS Access-Accept message 
that allows the device to forward traffic from that MAC address. The RADIUS Access-Accept 
message can also contain attributes set for the MAC address in its access profile on the RADIUS 
server.

If one of the attributes in the Access-Accept message specifies a VLAN identifier, and this VLAN is 
available on the device, the port is moved from its default VLAN to the specified VLAN.

To enable dynamic VLAN assignment for authenticated MAC addresses, you must add the following 
attributes to the profile for the MAC address on the RADIUS server. Dynamic VLAN assignment on 
multi-device port authentication-enabled interfaces is enabled by default.

In addition to dynamic VLAN assignment, BigIron RX Series also support dynamic ACL assignment 
as is the case with 802.1x port security.

Attribute name

Type

Value

Tunnel-Type

064

13 (decimal) – VLAN

Tunnel-Medium-Type

065

6 (decimal) – 802

Tunnel-Private-Group-ID

081

<vlan-name> (string) – either the name or the number of a 
VLAN configured on the device.

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды