Dell BigIron RX Series, Руководство по настройке

Страница: 298 / 1458

222 BigIron RX Series Configuration Guide
53-1002253-01
Displaying IP information
7
bootp-relay-max-hops The maximum number of hops away a BootP server can be located from the
Brocade router and still be used by the router’s clients for network booting.
To change this value, refer to
“Changing the maximum number of hops to a
BootP relay server” on page 220.
router-id The 32-bit number that uniquely identifies the Brocade router.
By default, the router ID is the numerically lowest IP interface configured on
the router. To change the router ID, refer to
“Changing the router ID” on
page 182.
enabled The IP-related protocols that are enabled on the router.
disabled The IP-related protocols that are disabled on the router.
Static routes
Index The row number of this entry in the IP route table.
IP Address The IP address of the route’s destination.
Subnet Mask The network mask for the IP address.
Next Hop Router The IP address of the router interface to which the Brocade router sends
packets for the route.
Metric The cost of the route. Usually, the metric represents the number of hops to
the destination.
Distance The administrative distance of the route. The default administrative distance
for static IP routes in Brocade routers is 1.
To list the default administrative distances for all types of routes or to
change the administrative distance of a static route, refer to
“Changing
administrative distances” on page 767.
Policies
Index The policy number. This is the number you assigned the policy when you
configured it.
Action The action the router takes if a packet matches the comparison values in
the policy. The action can be one of the following:
•
deny – The router drops packets that match this policy.
•
permit – The router forwards packets that match this policy.
Source The source IP address the policy matches.
Destination The destination IP address the policy matches.
Protocol The IP protocol the policy matches. The protocol can be one of the following:
•
ICMP
•
IGMP
•
IGRP
•
OSPF
•
TCP
•
UDP
TABLE 51 CLI display of global IP configuration information (Continued)
This field... Displays...