manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1371

BigIron RX Series Configuration Guide

1295

53-1002253-01

Configuring the Syslog service

A

Disabling or re-enabling Syslog

Syslog is enabled by default. To disable it, enter the following command at the global CONFIG level.

BigIron RX(config)# no logging on

Syntax: [no] logging on [

<udp-port>

]

The 

<udp-port>

 parameter specifies the application port used for the Syslog facility.  The default is 

514.

To re-enable logging, enter the following command.

BigIron RX(config)# logging on

This command enables local Syslog logging with the following defaults:

•

Messages of all severity levels (Emergencies – Debugging) are logged.

•

Up to 50 messages are retained in the local Syslog buffer.

•

No Syslog server is specified.

Specifying a Syslog server

To specify a Syslog server, enter a command such as the following.

BigIron RX(config)# logging host 10.0.0.99 

For backward compatibility, the software reads the old command syntax from the startup 
configuration, and converts it to the new command syntax in the running configuration.

Syntax: logging host 

<ip-addr>

 | 

<

server-name> 

Specifying an additional Syslog server

To specify an additional Syslog server, enter the logging host 

<ip-addr>

 command again, as in the 

following example.  You can specify up to six Syslog servers.

Enter a command such as the following.

BigIron RX(config)# logging host 10.0.0.99 

BigIron RX(config)# show log

Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)

    Buffer logging: level ACDMEINW, 38 messages logged

    level code: A=alert C=critical D=debugging M=emergency E=error

                I=informational N=notification W=warning

Static Log Buffer:

Dynamic Log Buffer (50 entries):

21d07h02m40s:warning:list 101 denied tcp 209.157.22.191(0)(Ethernet 4/18 

0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)

19d07h03m30s:warning:list 101 denied tcp 209.157.22.26(0)(Ethernet 4/18 

0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)

17d06h58m30s:warning:list 101 denied tcp 209.157.22.198(0)(Ethernet 4/18 

0010.5a1f.77ed) -> 198.99.4.69(http), 1 event(s)

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды