Dell BigIron RX Series, Руководство по настройке

Страница: 796 / 1458

720 BigIron RX Series Configuration Guide
53-1002253-01
Displaying OSPF information
25
Displaying OSPF information
You can display the following OSPF information:
•
Trap, area, and interface information – refer to “Displaying general OSPF configuration
information” on page 720.
•
CPU utilization statistics – refer to “Displaying CPU utilization and other OSPF tasks” on
page 721.
•
Area information – refer to “Displaying OSPF area information” on page 723.
•
Neighbor information – refer to “Displaying OSPF neighbor information” on page 724.
•
Interface information – refer to “Displaying OSPF interface information” on page 725.
•
Route information – refer to “Displaying OSPF route information” on page 727.
•
External link state information – refer to “Displaying OSPF external link state Information” on
page 729.
•
Link state information – refer to “Displaying OSPF database link state information” on
page 730.
•
Virtual Neighbor information – refer to “Displaying OSPF virtual neighbor and link information”
on page 732.
•
Virtual Link information – refer to “Displaying OSPF virtual link information” on page 734.
•
ABR and ASBR information – refer to “Displaying OSPF ABR and ASBR information” on
page 731.
•
Trap state information – refer to “Displaying OSPF trap status” on page 732.
Displaying general OSPF configuration information
To display general OSPF configuration information, enter the following command at any CLI level.