manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1007

BigIron RX Series Configuration Guide

931

53-1002253-01

Configuring multi-device port authentication

31

Syntax: [no] mac-authentication enable-dynamic-vlan

Dynamic multiple VLAN assignment for Multi-device port authentication

When you add attributes to a user profile on the RADIUS server, the 

<vlan-name>

 value for the 

Tunnel-Private-Group-ID attribute can specify the name or number of one or more VLANs configured 
on the Brocade device.  

For example, to specify an untagged VLAN, use the following.

"U:10" or "U:marketing"

When the RADIUS server specifies an untagged VLAN ID, the port default VLAN ID (or 

PVID

) is 

changed from the system DEFAULT-VLAN (VLAN 1) to the specified VLAN ID.  The port transmits only 
untagged traffic on its PVID.  In this example, the port PVID is changed from VLAN 1 (the 
DEFAULT-VLAN) to VLAN 10 or the VLAN named "marketing".

The PVID for a port can be changed only once through RADIUS authentication.  For example, if 
RADIUS authentication for a Client causes a port PVID to be changed from 1 to 10, and then 
RADIUS authentication for another Client on the same port specifies that the port PVID be moved 
to 20, then the second PVID assignment from the RADIUS server is ignored.  

If the link goes down, or the dot1x-mac-session for the Client that caused the initial PVID 
assignment ages out, then the port reverts back to its original (non-RADIUS-specified) PVID, and 
subsequent RADIUS authentication can change the PVID assignment for the port.  

If a port PVID is assigned through the multi-device port authentication feature, and 802.1X 
authentication subsequently specifies a different PVID, then the PVID specified through 802.1X 
authentication overrides the PVID specified through multi-device port authentication.

To specify tagged VLANs, use the following.

"T:12;T:20" or "T:12;T:marketing"

In this example, the port is added to VLANs 12 and 20 or VLANs 12 and the VLAN named 
"marketing".  When a tagged packet is authenticated, and a list of VLANs is specified on the 
RADIUS server for the MAC address, then the packet tag must match one of the VLANs in the list in 
order for the Client to be successfully authenticated.  If authentication is successful, then the port 
is added to all of the VLANs specified in the list.

Unlike with a RADIUS-specified untagged VLAN, if the dot1x-mac-session for the Client ages out, the 
port membership in RADIUS-specified tagged VLANs is not changed.  In addition, if multi-device 
port authentication specifies a different list of tagged VLANs, then the port is added to the 
specified list of VLANs.  Membership in the VLANs specified through 802.1X authentication is not 
changed.

To specify an untagged VLAN and multiple tagged VLANs, use the following.

"U:10;T:12;T:marketing"

When the RADIUS server returns a value specifying both untagged and tagged VLAN IDs, the port 
becomes a dual-mode port, accepting and transmitting both tagged traffic and untagged traffic at 
the same time.  A dual-mode port transmits only untagged traffic on its default VLAN (PVID) and 
only tagged traffic on all other VLANs.

In this example, the port VLAN configuration is changed so that it transmits untagged traffic on 
VLAN 10, and transmits tagged traffic on VLAN 12 and the VLAN named "marketing". 

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды