manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1091

BigIron RX Series Configuration Guide

1015

53-1002253-01

Using the user-based security model

36

Using the user-based security model

SNMP version 3 (RFC 2570 through 2575) introduces a User-Based Security model (RFC 2574) for 
authentication and privacy services.

SNMP version 1 and version 2 use community strings to authenticate SNMP access to 
management modules. This method can still be used for authentication.  In SNMP version 3, the 
User-Based Security model of SNMP can be used to secure against the following threats:

•

Modification of information

•

Masquerading the identity of an authorized entity

•

Message stream modification

•

Disclosure of information

Furthermore, SNMP version 3 supports View-Based Access Control Mechanism (RFC 2575) to 
control access at the PDU level. It defines mechanisms for determining whether or not access to a 
managed object in a local MIB by a remote principal should be allowed. (Refer to 

“Defining SNMP 

views”

 on page 1020.)

NOTE

SNMP version 3 Notification is not supported at this time. The system will generate traps in SNMP 
version 1 format.

NOTE

SNMP may timeout when trying to get module temperature values. You must increase the timeout 
value to 10 seconds to prevent a timeout.

Configuring your NMS

To be able to use the SNMP version 3 features.

1. Make sure that your Network Manager System (NMS) supports SNMP version 3.

2. Configure your NMS agent with the necessary users.

3. Configure the SNMP version 3 features in the BigIron RX.

Configuring SNMP version 3 on the BigIron RX

To configure SNMP version 3 on the BigIron RX, do the following.

1. Enter an engine ID for the management module using the snmp-server engineid command if 

you will not use the default engine ID. Refer to 

“Defining the engine ID”

 on page 1016.

2. Create views that will be assigned to SNMP user groups using the snmp-server view command.   

Refer to 

“Defining SNMP views”

 on page 1020 for details.

3. Create ACL groups that will be assigned to SNMP user groups using the access-list command. 

Refer to 

Chapter 21, “Access Control List”

 for details.

4. Create user groups using the snmp-server group command. Refer to 

“Defining an SNMP group”

 

on page 1016.

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды