manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1049

BigIron RX Series Configuration Guide

973

53-1002253-01

Configuring 802.1x port security

33

•

If the 

<vlan-name>

 string does not match the name of a VLAN, the BigIron RX checks whether 

the string, when converted to a number, matches the ID of a VLAN configured on the device. If 
it does, then the client’s port is placed in the VLAN with that ID.

•

If the 

<vlan-name>

 string does not match either the name or the ID of a VLAN configured on 

the device, then  the client will not become authorized.

The show interface command displays the VLAN to which an 802.1x-enabled port has been 
dynamically assigned, as well as the port from which it was moved (that is, the port’s default VLAN). 
Refer to 

“Displaying dynamically assigned VLAN information”

 on page 986 for sample output 

indicating the port’s dynamically assigned VLAN.

Dynamic multiple VLAN assignment for 802.1X ports

BigIron RX Series supports 802.1x authentication on untagged ports only. When the RADIUS server 
specifies an untagged VLAN ID, the port default VLAN ID (or 

PVID

) is changed from the system 

DEFAULT-VLAN (VLAN 1) to the specified VLAN ID.  The port transmits only untagged traffic on its 
PVID. For more information, refer to 

“Dynamic multiple VLAN assignment for Multi-device port 

authentication”

 on page 931.

For a configuration example, refer to 

“802.1X Authentication with dynamic VLAN assignment”

 on 

page 992.

Considerations for dynamic VLAN assignment in an 
802.1x multiple client configuration 

The following considerations apply when a Client in a 802.1x multiple client configuration is 
successfully authenticated, and the RADIUS Access-Accept message specifies a VLAN for the port:

•

If the port is not already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of a valid VLAN on the Brocade BigIron RX, then the port is 
placed in that VLAN.

•

If the port is already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of a different VLAN, then it is considered an authentication 
failure.  The port’s VLAN membership is not changed.

•

If the port is already a member of a RADIUS-specified VLAN, and the RADIUS Access-Accept 
message specifies the name or ID of that same VLAN, then traffic from the Client is forwarded 
normally.

•

If the RADIUS Access-Accept message specifies the name or ID of a VLAN that does not exist 
on the Brocade BigIron RX, then it is considered an authentication failure.

•

If the RADIUS Access-Accept message does not contain any VLAN information, the Client’s 
dot1x-mac-session is set to “access-is-allowed”.  If the port is already in a RADIUS-specified 
VLAN, it remains in that VLAN.

Disabling and enabling strict security mode for dynamic 
filter assignment

By default, 802.1x dynamic filter assignment operates in 

strict security mode

.  When strict security 

mode is enabled, 802.1x authentication for a port fails if the Filter-ID attribute contains invalid 
information, or if insufficient system resources are available to implement the per-user IP ACLs or 
MAC address filters specified in the Vendor-Specific attribute.

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды