manualshive.com logo in svg

Dell BigIron RX Series, Руководство по настройке

Поделиться
Скачать
Dell BigIron RX Series Скачать руководство пользователя страница 1094

1018

BigIron RX Series Configuration Guide

53-1002253-01

Configuring your NMS

36

•

Advanced Encryption Standard (AES) – The 128-bit encryption standard adopted by the 
U.S. government.  This standard is a symmetric cipher algorithm chosen by the National 
Institute of Standards and Technology (NIST) as the replacement for DES.  

Here is an example of how to create the account.

BigIron RX(config)# snmp-s user bob admin v3 access 2 auth md5 bobmd5 priv des 

bobdes

The CLI for creating SNMP version 3 users has been updated as follows.

Syntax:  [no] snmp-server user <

name

> <

groupname

> v3 

[ [access <

standard-acl-id

>] 

[ [encrypted] auth md5 <

md5-password

> | sha <

sha-password

> 

[priv [encrypted] des <

des-password

> | aes <

aes-password-key

>] ] ]

The <

name

> parameter defines the SNMP user name or security name used to access the 

management module.

The <

groupname

> parameter identifies the SNMP group to which this user is associated or 

mapped.  All users must be mapped to an SNMP group.  Groups are defined using the snmp-server 
group command.

NOTE

The SNMP group to which the user account will be mapped should be configured before creating the 
user accounts; otherwise, the group will be created without any views.  Also, ACL groups must be 
configured before configuring user accounts.

The v3 parameter is required. 

The access <

standard-acl-id

> parameter is optional.  It indicates that incoming SNMP packets are 

filtered based on the ACL attached to the user account.  

NOTE

The ACL specified in a user account overrides the ACL assigned to the group to which the user is 
mapped.  If no ACL is entered for the user account, then the ACL configured for the group will be used 
to filter packets. 

The encrypted parameter means that the MD5 or SHA password will be a digest value.  MD5 has 
16 octets in the digest.  SHA has 20.  The digest string has to be entered as a hexadecimal string.  
In this case, the agent need not generate any explicit digest.  If the encrypted parameter is not 
used, the user is expected to enter the authentication password string for MD5 or SHA.  The agent 
will convert the password string to a digest, as described in RFC 3414. 

The auth  md5 | sha parameter  is optional.  It defines the type of encryption that the user must 
have to be authenticated.  Choose between MD5 or SHA encryption. MD5 and SHA are two 
authentication protocols used in SNMP version 3.

The <

md5-password

> and <

sha-password

> define the password the user must use to be 

authenticated.  These password must have a minimum of 8 characters. If the encrypted parameter 
is used, then the digest has 16 octets for MD5 or 20 octets for SHA.

NOTE

Once a password string is entered, the generated configuration displays the digest (for security 
reasons), not the actual password.  

Содержание BigIron RX Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды