Daikin LXE10E-1 Скачать руководство пользователя страница 65

Страница: 65 / 164

3-23

Alarm record scroll function

The alarms detected over the last 7 days are displayed on the controller which scrolls through them at

the rate of one sec/alarm.

< Operation procedure >

The LED indicates alarm codes, and the LCD displays date and time.

To pauze the scrolling action, press the

key. To advance to the next alarm code detected,

press the

key again. If arrow key is not pressed for 10 seconds, then the continuous scrolling

action is resumed. To see data from the beginning, press and hold the

key for 3 seconds.

To return to the current indication mode screen, press the

key.

If key operation is not performed for 5 minutes, the current indication mode screen is resumed.

If the successive (scroll) screen is currently displayed, the current indication mode screen is resumed

when 5 minutes elapses after the indication ends.

To return to the operation setting mode, press the

key.

●

Example of ALARM RECORD SCROLL INDICATION MODE

※

It is assumed that the current date and time are June 27, 2002, 14:00.

SUPPLY
RETURN

ALARM
R.H.

-----
-----
-----

SUPPLY

RETURN
ALARM

R.H.

-----
-----
-----

2 5

E 1 0 1

0 0

SUPPLY

RETURN
ALARM
R.H.

-----
-----
-----

SUPPLY
RETURN

ALARM
R.H.

-----
-----
-----

– – – –

SUPPLY

RETURN
ALARM
R.H.

-----
-----
-----

2 5

E 1 0 1

0 0

COMP. DEFROST IN RANGE DE-HUMID.

2 5

0 0

COMP. DEFROST IN RANGE DE-HUMID.

2 5

E 1 0 1

0 0

2 7

E 2 0 7

0 0

An example
Alarm E207 occurred between
p.m. 1:00 and p.m. 2:00, June 27, 2002
(To be displayed on LCD)

-----
-----

the key for 3 seconds.

To restart, press and hold

One

second

later

Press the

Key

Press the

or Non key

operation for 10

seconds.

Key

Scroll indication

※

To restore the current indication mode,

press the key.

※

If key operation is not performed within

5 minutes, the current indication mode

screen is resumed.

※

To return to the operation setting mode,

press the key.

After completion of indication of
the oldest data (Final indication)

An example
Alarm E101 occurred between p.m.
3:00 and p.m. 4:00, June 25, 2002
(To be displayed on LCD)

An example
Stop on the data of between p.m.
3:00 and p.m. 4:00, June 25, 2002

An example
Restart on the point where the process
was stopped on the data of between
p.m. 3:00 and p.m. 4:00, June 25, 2002

https://daikin-p.ru

Содержание LXE10E-1





































































































































































Результаты поиска

Содержание LXE10E-1

Отзывы:

Бренды по названию

Популярные бренды

Daikin LXE10E-1, Руководство по обслуживанию

Результаты поиска

Содержание LXE10E-1

Отзывы:

Бренды по названию

Популярные бренды