Daedong KIOTI CS2610, Руководство пользователя

Страница: 156 / 192

cs2610
7
-
22
4. when cleaning the element, refer
to the instructions that follow.
5. if the element is stained with car-
bon , dust or oil, replace the filter.
6. change the element every 6
months or every 100 hours.
to clean the element, use only clean
dry compressed air on the inside of
the element. air pressure at the noz-
zle must not exceed 29 psi (2 kgf/cm
²) maintain reasonable distance be-
tween the nozzle and the filter.
(1) fuel pipe (2) tightening Band
ChECkING fUEl lINEs (U)
although checking the fuel pipe con-
nection is recommended every 100
service hours, it should be done ev-
ery 6 months if operation does not
exceed 100 hours in 6 months.
1. if the hose clamps are loose, apply
a slight coat of lubricant onto the
threads and securely tighten it.
2. the fuel pipe is made of rubber
and ages regardless of period of
service. change the fuel pipe to-
gether with the hose clamps every
two years and securely tighten.
M46O725A
The air cleaner will only fulfill
its function if it is correctly
and regularly maintained. A
poorly maintained air cleaner
will mean loss of power, ex -
cessive fuel consumption and
a reduction in engine life.
do not run the engine with fil -
ter element removed.
•
•
IMPORTANT
EVACUATOR VAlVE
open the evacuator valve once a
week under ordinary conditions or
daily when used in dusty conditions
to get rid of large particles of dust
and dirt.
Be sure to refit the cap with
the arrow (on the rear of
cover) upright. If the cap is
improperly fitted, evacuator
valve will not function and
dust will adhere to the ele-
ment.
•
IMPORTANT
M46-EU,AU-EEC인증용-07.indd 22 2017-04-25 오후 5:00:06