Comtech EF Data CD-MNLBC4000, Инструкция по установке и эксплуатации

Страница: 159 / 166

LBC-4000 L-Band Up/Down Converter System MN/LBC4000.IOM
Appendix B Revision 5
B–5
•
REDUND Submenu – The selections here allow you to identify the
redundancy state and mode.
SEE SECT. B.2.1.3 TO USE THIS SUBMENU IN
REDUNDANCY OPERATIONS.
• REFADJ
Submenu – This screen allows you to adjust the reference
oscillator.
• SPECT-INV Submenu – The selections here allow you to set the Converter
A and Converter B spectral inversion to INVERTED or NORMAL.
B.2.1.3 (CONFIG:) REDUND (Redundancy)
Redundancy:
Mode State FrcBkup
Use the [

][

] arrow keys to select Mode , State , or F up. Press [ENT] .
(CONFIG:) Redundancy

Mode
Redundancy:
Control Mode = Manual
Use the [

][

] arrow keys to select Manual or Auto. Press [ENT] .
Note that, if you attempt to access this menu and the Redundancy State is
Disabled, you will see this message:
Not Available In
Current Mode
CONFIG: Redundancy

State
Redundancy Mode:
Control State = Enable
Use the [

][

] arrow keys to select Disable or Enable . Press [ENT] .
CONFIG: Redundancy

FrcBkup
Config Manual Redundancy
Force Backup NO