Comtech EF Data CD-MNLBC4000, Инструкция по установке и эксплуатации

Страница: 112 / 166

LBC-4000 L-Band Up/Down Converter System MN/LBC4000.IOM
Ethernet Interface Operation Revision 5
7–16
7.5.2.2 Admin | SNMP
Sect
.
7.2 SNMP Interface
The Administrator must use this page to manage the SNMP (Simple Network
Management Protocol) settings.
Figure 7-10. ‘Admin | SNMP’ Page
Simple Network Management – Use the drop-down list to set the Simple
Network Management operational setting as Enabled or Disabled .
The Read , Write , and Trap Community Strings can be any combination of
characters and a length of 0 to 20 characters:
•
The factory default Read Community String is public .
•
The factory default Write Community String is private .
•
The factory default Trap Community String is comtech .
SNMP Contact / SNMP Location / SNMP Name – Enter this identity information
in any alphanumeric combination with a length of 0 to 20 characters.
Enable Authentication Trap – Use the drop-down list to set Trap operation as
Enabled or Disabled .
The Administrator can assign up to two Trap IP addresses.
Trap Version – Use the drop-down list to set the Trap Version as SNMPv1 or
SNMPv2 .