Comtech EF Data CD-MNLBC4000, Инструкция по установке и эксплуатации

Страница: 111 / 166

LBC-4000 L-Band Up/Down Converter System MN/LBC4000.IOM
Ethernet Interface Operation Revision 5
7–15
MAC Address – The MAC Address is read-only . It is set at the factory to a
guaranteed unique address. It cannot be changed.
Click [Change IP Address] . Click [Reset] to revert to the previously assigned IP
Gateway and IP Address/Range,
System Account Access Information
Admin , Read/Write , and Read Only Names and Passwords:
The User name and Password can be any alphanumeric combination
with a maximum length of 10 characters. The factory defaults for these
names/passwords are:
•
Admin comtech/comtech
•
Read/Write opcenter/1234
•
Read Only monitor/1234
SMTP Server – Specify the mail server IP address from where you want to send
the e-mail.
SMTP Domain Name / Destination – The Administrator can assign the SMTP
Domain Name and Destination. This is required if the e-mail feature of the
‘ Home | Support’ page ( Sect . 7.5.1.3 ) is to be used.
•
For SMTP Domain Name , specify the domain of the e-mail server (usually
found to the right of the @ symbol in an e-mail address).
•
For
SMTP Domain Destination
, specify the e-mail recipient name (usually
found to the left of the @ symbol in an e-mail address).
Click
[Submit Access]
. Click
[Reset]
to revert to the previously assigned System
Account Access Information.
Webpage Timeout
To set an automatic timeout to safeguard access to an already logged-in unit, use
the drop-down list to set the time value as 5 minutes or 8 hours , and then click
[Change] .
The active session terminates if the unit remains idle (i.e., when no user activity
occurs) beyond the assigned Webpage Timeout. A valid user name and password
is then required to resume the HTTP Interface session.