Cisco Nexus 7004, Руководство по установке и справочное руководство по оборудованию

Страница: 99 / 508

C H A P T E R
4-1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
4
Installing a Cisco Nexus 7010 Chassis
This chapter describes how to install a new or relocated Cisco Nexus 7010 chassis in a rack or cabinet.
For information about installing other Cisco Nexus 7000 Series chassis or power supplies, see the
following chapters:
•
Chapter 2, “Installing a Cisco Nexus 7004 Chassis”
• Chapter 3, “Installing a Cisco Nexus 7009 Chassis.”
•
Chapter 5, “Installing a Cisco Nexus 7018 Chassis.”
• Chapter 6, “Installing Power Supplies.”
This chapter includes the following sections:
• Preparing to Install the Switch, page 4-1
•
Installing the Bottom-Support Rails on the Rack, page 4-4
• Installing the Chassis, page 4-7
•
Grounding the Cisco Nexus 7010 Chassis, page 4-11
• Installing Storage Media in a Supervisor Module, page 4-16
•
Installing the Front Doors and Frame Assembly, page 4-17
• Installing the Air Filter, page 4-23
Preparing to Install the Switch
This section includes the following topics:
•
Required Tools, page 4-2
• Installing a Four-Post Rack or Cabinet, page 4-2
•
Unpacking and Inspecting a New Switch, page 4-3
Note
You must set up one four-post, 19-inch EIA rack or cabinet before you can install the Cisco Nexus 7010
chassis. Make sure that you order the rack or cabinet and have it delivered before installing the chassis.