Cisco Nexus 7004, Руководство по установке и справочное руководство по оборудованию

Страница: 451 / 508

E-13
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
b.
Press the locking button on the back side of the door (behind the opened latch handle) so that the
latch handle flattens to the front side of the door.
c.
Hold the opened side of the door with one hand and use your other hand to open the latch handle on
the hinged side of the door until the handle clicks. Use both hands to remove the door from the
chassis.
d.
Press the locking button on the inside surface of the door behind the opened latch to flatten the latch
handle to the front side of the door.
e. Wrap the door in the bubble wrap included in the front-door and air-intake-frame kit. Set this by the
kit for packing later in this process.
f.
Remove the bottom hinge bracket by removing four screws that attach it to the chassis and four
screws that attach it to the right and left cable management frames (two screws for each frame) as
shown in
Figure E-6 . Place the bracket with the front door wrapped in bubble wrap and put the
screws in a bag for small door parts.
Figure E-6 Removing the Bottom Hinge Bracket from the Chassis
1
Pull out either door handle.
2
Fully rotate the door away from the chassis.