Cisco Nexus 7004, Руководство по установке и справочное руководство по оборудованию

Страница: 296 / 508

10-38
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Chapter 10 Installing or Replacing Components
Installing an I/O Module
Step 7
With a hand on each ejector, pull the module part way out of its slot in the chassis.
Step 8 Grasp the front edge of the module and place your other hand under the module to support its weight.
Pull the module out of its slot. Do not touch the module circuitry.
Caution
To prevent ESD damage, avoid touching the electronic circuitry and prevent anything else from coming
in contact with the circuitry.
Step 9
If you are removing the module from a Cisco Nexus 7010 chassis, rotate the module 90 degrees
counterclockwise so that it is horizontal (with the circuitry seen from above).
Step 10 Place the module on an antistatic mat or repack it in its original packing materials as shown in
Figure 10-12 (8- and 48-port types of I/O modules) or Figure 10-13 (32-port types of I/O modules).
Figure 10-12 Repacking an 8- or 48-Port I/O Module (N7K-M108X2-12L, N7K-M148GT-11,
N7K-M148GT-11L, N7K-M148GS-11, or N7K-M148GS-11L)