Ceyear 4051 Series, Руководство пользователя

Страница: 60 / 751

3 Introduction to Use
3.4 Data management
46
Fig. 3.22 The interface of opening peak threshold
3.4 Data management
This section describes working state saving/calling, measurement result data input/output methods and
screenshot printing/saving method of the 4051 Series Signal/Spectrum Analyzer.

Working state saving/calling „„„„„„„„„„„„„„„„„„„„„„„„„„„„„
46
 Data saving/calling
„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
48
 Screenshot printing/saving
„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
51
3.4.1 Working state saving/calling

Instrument reset state „„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
46
 User state saving/calling „„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
47
3.4.1.1 Instrument reset state
The 4051 Series Signal/Spectrum Analyzer uses the startup state previously saved by users as the initial state
of startup measurement. If there is no such startup state, the factory default startup state will be called. Usually
when the measurement state of the instrument goes wrong, the initial state when the instrument works
properly can be restored by resetting the instrument state.
The reset state of the Series Signal Analyzer is saved and called as follows:
Step 1. save reset state:
 Press
【
System
】
key on the front panel.
 Press [PowerOn/Preset] soft menu.
 Press \[Save User Preset] soft menu.