Ceyear 4051 Series, Руководство пользователя

Страница: 364 / 751

5 Menu
5.2. Description of menu
350
[Self-Test ▶ ]
Control instrument Self-Test. The soft more include [Start], [Pause], [LO Step], [Circle Times], [Save Record
On and Off], [Display Struct Board eleunit], [More 1/2
▶
], [Load Record], [Print].
[Start]
Control the instrument to start[Self-Test] at initial access to [Self-Test
▶
] More or Pause Self-Test.
[Pause]
Pause Self-Test of the instrument.
[LO Step]
Set LO step frequency (default: 1 MHz) during instrument Self-Test.
[Circle Times]
Set cycle test count. When executing this function, the instrument will automatically stop Self-Test.
[Save Record On Off]
Set whether to save Self-Test records after test. Under default setting, the Save Record is ON.
[Display Struct BoardEleUnit]
Control the display method of instrument Self-Test results. When setting to Board Level, the Self-Test results
of internal electric circuits will be displayed; when setting to Unit, the Self-Test results of instrument unit-
level modules will be displayed.
[Load Record]
Call the Self-Test results saved in previous time.
[Print]
Control the printing of current instrument Self-Test results.
[Interface Config
▶
]
Pop up soft More related to interface config of the signal/spectrum analyzer, including [GPIB Address],
[Internet Config…], [Printer Reverse Normal], [Log File Man].
[GPIB Address]
Set GPIB address. That is 18 by default.
Remote Command:
:system:communicate:GPIB[:SELF]:address <integer>