Canon imagePASS-P2, Руководство по обслуживанию

Страница: 28 / 92

4. Select Fiery Server > Regional Settings and specify the current date and time, and click Save.
5. Click Log Out to exit Configure.
● Motherboard jumpers
IMPORTANT:
Jumper configuration should not be changed.
Jumper Description
J17
Pin 1
J17 is the Clear CMOS and Password jumper.
Default configuration: jumper cap installed on pins 2 and 3.
NOTE:
Because the jumper cap is very small, it is not necessary—and could introduce an error—to
remove the jumper cap in order to clear the CMOS settings.
14
MS
MS
1
12
16
MS
MS
MS
15
13
3
4
5
6
8
9
2
11
MS
7
10
Figure 13: Diagram of the motherboard
No. Item No. Item No. Item
1 HDD data connector (SATA0) 7 DIMM-B0 13 4-pin power connector (PWRCONN1)
2 Security chip (J23) 8 Crossover Ethernet port / Type A
USB3.0 ports (x2) 14 CPU fan connector (CPU FAN J16)
3 Battery (CR1) 9 Type A USB2.0 connector (x2) 15 FRONT FAN connector (J30)
4 Printer interface board (PCIE x16) 10 Type A USB2.0 ports (x2) / Network
port (RJ-45) 16 Service board connector (Port 80
Header) (EFI GPIO Header, J4)
5 Power button pins (J11) 11 CPU and cooling assembly MS Mounting screws
3. REPLACING PARTS
23