Canon imagePASS-P2, Руководство по обслуживанию

Страница: 62 / 92

12. In the Select a Network Adapter window of the Fiery Installer Builder, select the network connection that is corresponding to
the network port that you attached the Ethernet cable to, and then click Next.
A message appears that indicates that the installation has started.
NOTE:
After confirming the LED activity starts and the LED display shows the cyclic codes (C1 > C2 > C3 > C1...), turn off the printer
using the main power switch on the front.
Once the installation is complete, the imagePASS will shut down automatically.
13. Flip both of the imagePASS service switches to the Normal (OFF) position.
2
1
Figure 32: Flipping the imagePASS service switches
No. Item
1 Flip the service switches from Service (ON) position...
2 ...to Normal mode (OFF) position.
14. Disconnect the Ethernet cable from the imagePASS network port and the Windows computer.
15. Reconnect all the cables that were connected to the imagePASS.
16. Make sure that the imagePASS power switch is in the ON (|) position, and power on the imagePASS(see
“System software
installation reminders” on page 40 ).
4. INSTALLING SYSTEM SOFTWARE
57