manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

92    ARTEMIS 

Digital Broadcast Production Console

Processing Audio

DefaultFaderInteractionMode

This section describes the operational 
interaction conditions when settings 
and fader positions are modified in 
combination with AutoFaders.

Faders in this default mode allow the 
user to temporarily override AutoFader 
control using the path fader to open, close 
or adjust the path’s level.  Faders can be 
manually adjusted, and their output will 
reflect the manually set physical position, 
whether the AutoFader is active or 
inactive.  Adjustments affect current audio, 
but do not affect subsequent autofades.  

AutoFaders do not fight manual control. 
If a fader is being touched at the time 
an AutoFader is fired, OR when an 
AutoFader transitions from its initial ‘Fade 
In Delay’ period into its’ ‘Fade-In’ period, 
then the AutoFader fade-in is cancelled. 
This does not cancel the fade-out for this 
autofade event (which will be triggered 
as normal if the fader has been manually 
opened in the interim). 

If a fader is touched whilst an AutoFader 
fade-in is in progress, the auto-fader 
immediately relinquishes control of 
the fade-in (but can still perform the 
subsequent fade out if the fader is no 
longer being touched at that point in time) 

Similarly, if a fader is being touched or 
moved when an AutoFader enters the 
fade-out stage, or during the fade-out 
stage, the AutoFader again immediately 
relinquishes control of the fade out to the 
operator.

AutoFader fade-in’s & fade-out’s begin 
from the current physical position of 
the fader - If they have been manually 
adjusted, this becomes the start point, 
they do not have to go to their specified  
or expected On or Off level first.

Fade in and fade out values are absolute 
in that the time taken from the beginning 
to the end of the fade-in or fade-out 
period lasts for the duration set by the 
relevant control, regardless of the actual 
physical starting level that may have been 
manually set and differ to that of the 
AutoFader’s set On/Off level.

If a fader is positioned at or below its 
AutoFader’s set Off-Level when a fade-
out is instigated, the fade-out will be 
cancelled.

If a fader is positioned at, or above its 
AutoFader’s set On-Level when a fade-in 
is instigated, the fade-in will be cancelled.

If the Fade-In Level is being adjusted 
whilst an AutoFader Fade-In is in 
progress, or similarly, the Fade-Out Level 
is being adjusted during a Fade-Out then 
the Fade-In/Out continues at a constant 
rate-of-fade until the fader level and 
In/Out level meet.  At which point the 
AutoFader stops due to the target level 
being met.  (The Fader will then track 
with the In/Out level control until the next 
AutoFader fade In/Out by virtue of the 
fader being fully in/out). 

Fade-In Delay, Force Release & Fade-
Out Delay can all be adjusted whilst the 
AutoFader is in their phase of operation, 
and the adjustments affect the phase they 
are in (rather than being applied to the 
next AutoFader trigger cycle).

Each phase can be extended up to its 
maximum duration whilst that phase is 
ongoing.

When reducing the duration, the relevant 
phase will end and the next phase start 
when the length of time passed since the 
start of the phase meets that set by the 
control.      

When an AF is fully In or Out, adjusting 
the relevant In/Out Level control will 
directly affect the level output by the path 
- the fader will track the adjustments in 
real time - it will not apply a fade in/out to 
track the adjustments.

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Imer Group 1194300 Operating, Maintenance, Spare Parts Manual preview
1194300
Бренд: Imer Group Страницы: 39
Grohe Europlus E 36 021 Manual preview
Europlus E 36 021
Бренд: Grohe Страницы: 82
Omnitronic 1422FX User Manual preview
1422FX
Бренд: Omnitronic Страницы: 44
Barnstead International Maxi Mix Plus M63215 Operation Manual And Parts List preview
Maxi Mix Plus M63215
Бренд: Barnstead International Страницы: 16
X-keys XK-0985-UDP3-R Product Manual preview
XK-0985-UDP3-R
Бренд: X-keys Страницы: 4
Klutch 49413 Owner'S Manual preview
49413
Бренд: Klutch Страницы: 18
Hill Audio ZPR-2820 User Manual preview
ZPR-2820
Бренд: Hill Audio Страницы: 21
Biamp AudiaFLEX Manual preview
AudiaFLEX
Бренд: Biamp Страницы: 3
Behringer SUPER FUZZ SF300 Manual preview
SUPER FUZZ SF300
Бренд: Behringer Страницы: 23
inventum mini-blender NB121 Instruction Manual preview
mini-blender NB121
Бренд: inventum Страницы: 28
Wharfedale Pro Titan 12 ACTIVE Operating Manual And User Manual preview
Titan 12 ACTIVE
Бренд: Wharfedale Pro Страницы: 33
American Audio Q-221 Instruction Manual preview
Q-221
Бренд: American Audio Страницы: 14
Fearne SP21050 Care & Use Instructions preview
SP21050
Бренд: Fearne Страницы: 24
SpinCore Technologies iSpin-NMR Owner'S Manual preview
iSpin-NMR
Бренд: SpinCore Technologies Страницы: 30
CONSTRUCTA CHM1264S User Manual preview
CHM1264S
Бренд: CONSTRUCTA Страницы: 14
EarthQuaker Devices Hummingbird Operation Manual preview
Hummingbird
Бренд: EarthQuaker Devices Страницы: 2
Philips BTB8000 User Manual preview
BTB8000
Бренд: Philips Страницы: 24
Philips BTB2670 User Manual preview
BTB2670
Бренд: Philips Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды