manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

Features by Software Version

192   ARTEMIS 

Digital Broadcast Production Console

FEATURES BY SOFTWARE VERSION

V1.3

•  Second compressor/limiter in all path 

dynamics processing units.

•  Downmix defaults.
•  Partial memory isolates.
•  VCA style groups.
•  Surround channel input delay.
•  Autofaders.

V1.4CTA

•  External tone input enabled.
•  Monitor panel buttons for GPIO.
•  Channel cut from GPI.
•  Alias file support added.
•  User defined TFT meter layout.
•  Dolby unit control using GPIO.
•  Monitor insert.
•  Port labels and device names 

exchanged via Ember.  EMBER client 
may read and edit I/O box and port 
labels.

•  Multi- router software with redundancy.
•  Backup of 3rd party routes.
•  Basic SW-P-08 port patching and tally 

(TCP/IP).  Patching of input ports to 
output ports.

•  New sync screen and Trilevel sync 

inputs to define sync priority.

•  PFL to small LS.

V1.5

•  Selectable LoRo or LtRt downmixes on 

main outputs.

V1.6

•  BLITS tone ident added to oscillator.
•  EQ available in dynamics side-chain.
•  Bus output delay.
•  Saving shows as defaults.
•  M/S switching on meter selectors.

V1.7

•  SDI Embedder output audio channel 

mute control via EMBER.

•  EMBER control over alias files.

V1.8

•  Bluelink patchbays.
•  SMPTE2020 metadata insertion into 

SDI Embedder outputs.

•  User memory load / save from control 

surface panels.

•  EMBER control of user memory loads.
•  SW-P-08 mapping file management.

V1.8.1

•  Sidecar support.
•  3rd APFL bus set.
•  Artemis monitor / surround spill / 

Downmix / joystick control panel.

V1.8.1a

•  Aux pre cut when fader open option.

V1.8.2

•  Calrec Serial Control Protocol 

supported.

V1.9.2

•  Artemis Light support.
•  Full router redundancy available for 

multi- console networks.

•  Modular I/O and MADI I/O connections 

supported by expansion router ports.

•  EMBER remote control of console 

show / memory loads and I/O aliasing.

V1.10

•  Support for trunk links to increase 

bandwidth between routers in multi- 
track networked systems.

•  Maximum attack time on compressor 

limiters increased to 200ms.

V1.11

•  Delay controls available in units of 

video frames as well as ms.  +/- delay 
step button controls.  Option to set fps 
& +/- step size.

•  Follow Mon1 / Mon2 available as 

monitor / meter selector sources.

•  Hydra Patchbays replace Bluelinks
•  Jump to fader feature allows GUI to 

highlight currently assigned fader.

•  Direct talkback button per fader / path 

enabled.

V1.12

•  Automixer.
•  Dynamics sidechain links.
•  Display dynamics 1 & 2 processor 

settings simultaneously on TFT.

•  Display dynamics gain reduction for all 

elements of surround paths along with 
independence indication.

•  Fader setup screen & virtual faders for 

memories created on larger consoles.

•  User memory sequencing.

•  Separate brightness controls for 

buttons/knobs and displays.

•  External inputs can directly feed 

upstand TFT meters.

•  System PC support for Windows 7.

V1.12.1

•  Support for Dual Router Core 

Redundancy.

•  PFL output can be fed from various 

points in path signal chain (user 
selectable).

•  TFT input meters can be fed from 

various points in path signal chain (user 
selectable).

V1.13

•  Input port protection [patent pending]
•  Output port protection [patent pending]
•  Patch Lists in H2O (Hydra2 Salvos).
•  Ability to disable external fader control 

via CSCP.

•  Monitoring of up to 144 external inputs.
•  Tone to Aux outputs.
•  Option for opening a fader to cancel 

latched PFL. 

•  Option to disable fader over-press PFL.
•  Option to disable VCA editing.
•  Ability to disable a complete automixer
•  Simpler and clearer fader labels.
•  ‘Jump to Fader’ automatically highlights 

the patching connectors on the main 
application I/O screens. 

•  Improved consistency of modular I/O 

native port labels.

•  Inclusion of DevTools folder in release 

directory for router diagnostics.

V1.14

•  Every path now has 2.73 seconds of 

path delay in addition to the assignable 
input and output delay.

•  Mic Open systems.  Trigger GPOs 

when any signal in one of the five Mic 
Open systems is live to air.

•  16 Loudness meters are now available.
•  System Status messages are now 

available over SNMP.

•  Improved graphics and text rendering 

on the control surface.

•  Further accessibility developments.
•  Groups have +/- 24dB of input trim.
•  Mix Minus routing can be interrogated.

The following summarises key new features by the software version in which they were introduced. 
If you require features that are not available in the software version you are running, please contact 
Calrec Customer Support or your local Calrec distributor to discuss upgrade options.

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

MA lighting grandMA3 Installation Manual preview
grandMA3
Бренд: MA lighting Страницы: 6
MA grandMA3 Manual preview
grandMA3
Бренд: MA Страницы: 3
Rolls rm67 Specifications preview
rm67
Бренд: Rolls Страницы: 1
Harley Benton FXL4 User Manual preview
FXL4
Бренд: Harley Benton Страницы: 16
Gallet MIX712 Instruction Manual preview
MIX712
Бренд: Gallet Страницы: 20
R.G.V. Pasta Prof PL10S Instruction Manual preview
Pasta Prof PL10S
Бренд: R.G.V. Страницы: 52
PedalPCB Duck Box Filter Wiring Diagram preview
Duck Box Filter
Бренд: PedalPCB Страницы: 5
Samson MDR624 Owner'S Manual preview
MDR624
Бренд: Samson Страницы: 24
CAKEWALK Sonar V-STUDIO 100 Getting Started Manual preview
Sonar V-STUDIO 100
Бренд: CAKEWALK Страницы: 60
Technics SH-DX1200 Operating Instructions Manual preview
SH-DX1200
Бренд: Technics Страницы: 24
Chicago Electric 95111 Assembly And Operating Instructions Manual preview
95111
Бренд: Chicago Electric Страницы: 10
Dunlop M-120 MXR Auto Q User Manual preview
M-120 MXR Auto Q
Бренд: Dunlop Страницы: 4
Raider RDP-HM03 User Manual preview
RDP-HM03
Бренд: Raider Страницы: 68
KYOWA KW-4400 Instruction Manual preview
KW-4400
Бренд: KYOWA Страницы: 3
Rotel RMX-70 Owner'S Manual preview
RMX-70
Бренд: Rotel Страницы: 7
Malekko SNEAK ATTACK User Manual preview
SNEAK ATTACK
Бренд: Malekko Страницы: 8
Malekko CV.GT Manual preview
CV.GT
Бренд: Malekko Страницы: 7
Malekko Charlie Foxtrot User Manual preview
Charlie Foxtrot
Бренд: Malekko Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды