manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

18    ARTEMIS 

Digital Broadcast Production Console

Control Overview

CONFIGURATION PC OVERVIEW

The configuration PC is mounted 
inside the surface.  The only access 
available to the PC is through the 
keyboard, trackball, touchscreen 
display and USB port on the console 
upstand.

No control, audio or router processing is 
carried out by the system PC.  Processing 
is carried out on dedicated independent 
hardware located in the processing 
rack.  The system PC provides a control 
interface for setup and configuration.  The 
control surface itself, as well as audio and 
routing systems will all boot and continue 
to run irrespective of whether or not the 
PC is active or powered.

Peripherals

A standard control surface will have the 
PC’s touchscreen monitor mounted to 
an adjustable arm on the right hand side.  
A keyboard with trackball is normally 
located in a retractable tray mounted to 
the underside of the surface at the right 
hand side.  As an option, consoles can 
be built with the PC peripherals on the 
left-hand side.  Consoles are also often 
ordered with PC monitor screens and 
keyboards on both sides of the surface.  
In these cases only one of the pair will be 
connected to the system PC, the other 
set is typically used to control 3rd party 
equipment such as playout systems. 

Windowslogin

The default user login for operators is 

‘

calrec

’

 and requires no password. 

Mainapplication

The main purpose of the configuration 
PC is to run the main application, which 
provides access to many important 
console options.

The main application is launched 
automatically when the configuration PC 
is booted.  If the application has been 
closed, it can be re-loaded from the Start 
menu.

Fig 1 shows the layout of the main 
application.  Along the bottom edge of 
the application is the main menu which 

contains buttons for each of the main 
sections of the application.  When this 
document instructs you to go to the 

>Mem

 section, for example, it is the 

equivalent of saying: ‘touch the Mem 
button in the main application main menu’.

Once a certain section has been selected, 
a list of available screens will appear 
vertically along the left hand edge of the 
main application.  Touching one of these 
buttons will update the main application 
to display the relevant screen.  When this 
document instructs you to go to a certain 
screen, it is referring to touching the 
relevant button on this list, down the left 
hand side of the screen.

USBPort

A USB port linked to the configuration 
PC is available in the reset panel located 
in the upstand.  This can be used for 
backing up and restoring memories or 
settings from the console.  It is designed 
for portable flash based USB memory 
devices and as such may not provide 
power for larger USB hard drives.

FIG 1 - MAIN APPLICATION

Installing3rdpartysoftware

Although not relied upon for console 
operation, the system PC should be 
considered as broadcast equipment. 
Installation of software unauthorised 
by Calrec may impact on the PC’s 
performance and as such can invalidate 
the warranty.

Powerandreset

The system PC should automatically boot 
up when the control surface is powered.                    
If the PC screen is dark and does not 
wake up when the trackball is moved, 
check the AC power to the back of 
the monitor and that it has not been 
turned off by pressing its’ power switch.                                                                
A simple way to check if  the PC is 
powered is to press Caps Lock on the 
keyboard and check if the Caps Lock LED 
on the keyboard responds.  A reset switch 
for the PC is located behind the keyboard, 
at the rear left-hand side.  If the PC 
has been shutdown but is still powered.  
Pressing the reset switch should reboot it.

OnlineDocumentation

Electronic versions of all documentation 
may be accessed on the configuration PC.

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Jands Stage Manual preview
Stage
Бренд: Jands Страницы: 17
Way Huge WHE214 User Manual preview
WHE214
Бренд: Way Huge Страницы: 3
Euro-Pro Bravetti Platinum Pro EP552HL Owner'S Manual preview
Bravetti Platinum Pro EP552HL
Бренд: Euro-Pro Страницы: 4
PedalPCB The Gent Overdrive Wiring Diagram preview
The Gent Overdrive
Бренд: PedalPCB Страницы: 5
Native Instruments SOLID BUS COMP Manual preview
SOLID BUS COMP
Бренд: Native Instruments Страницы: 12
Bake Max BMPM20A Operation Manual preview
BMPM20A
Бренд: Bake Max Страницы: 10
Peavey Architectural Acoustics MMA 800T User Manual preview
Architectural Acoustics MMA 800T
Бренд: Peavey Страницы: 12
Art MX821 Operation Manual preview
MX821
Бренд: Art Страницы: 2
Bamix SliceSy Full Instruction Manual preview
SliceSy
Бренд: Bamix Страницы: 104
Behringer X32 DIGITAL MIXER Quick Start Manual preview
X32 DIGITAL MIXER
Бренд: Behringer Страницы: 22
KitchenAid Heavy Duty 6 Instructions And Recipes Manual preview
Heavy Duty 6
Бренд: KitchenAid Страницы: 28
KitchenAid KHMB732 Manual preview
KHMB732
Бренд: KitchenAid Страницы: 36
KitchenAid 9KHM92 Instructions Manual preview
9KHM92
Бренд: KitchenAid Страницы: 28
KitchenAid KHM72 Series Instructions Manual preview
KHM72 Series
Бренд: KitchenAid Страницы: 48
KitchenAid K45SS - Classic - Stand Mixer Service Manual preview
K45SS - Classic - Stand Mixer
Бренд: KitchenAid Страницы: 32
KitchenAid K45SS - Classic - Stand Mixer Manual preview
K45SS - Classic - Stand Mixer
Бренд: KitchenAid Страницы: 60
KitchenAid KV25G0XCV - Caviar, Professional 5 User Manual preview
KV25G0XCV - Caviar, Professional 5
Бренд: KitchenAid Страницы: 88
Samson Txm16 Product Specification Sheet preview
Txm16
Бренд: Samson Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды