manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

10    ARTEMIS 

Digital Broadcast Production Console

Information

TECHNICAL SUPPORT

[email protected]

Telephone:

 

Email - Technical:

Email - General:

Postal address:

Fax:

Website:

+44 (0) 1422 842159

[email protected]

Calrec Audio Ltd.
Nutclough Mill,
Hebden Bridge,
West Yorkshire,
HX7 8EZ,
U.K.
+44 (0) 1422 842159
www.calrec.com

(9:00am-5:30pm)

 

Should you require any technical 
assistance with your Calrec product 
then please contact your regional 
Calrec distributor. Customers within 
the UK or Ireland should contact 
Calrec directly.

For a complete list of worldwide 
distributors by region, go to  

www.calrec.com 

or contact us for 

more information.

For pre-delivery technical enquiries, UK 
and Ireland customers should contact the 
Calrec project manager assigned to their 
order.  Post delivery, the Calrec Customer 
Support team will take care of your 
technical enquiries. 

Our UK customer support team work 
closely with our global distributor network 
to provide the highest level of after sales 
support.  Your distributor should be your 
first point of contact and will often be 
able to provide an instant solution, be it 
technical advice, spares or a site visit by 
an engineer. 

Calrec UK customer support and our 
global technical team provide free of 
charge technical support and advice by 
phone or email to all customers. 

Once your console is installed we can 
provide an engineer on site to carry out 
system commissioning.  

Commissioning ensures the equipment 
is correctly installed and fully functioning 
before it goes into use.  

During commissioning, our engineers can 
also help and advise with configuration 
and setup.

Calrecaftersalessupportincludes:

•  Free of charge comprehensive 

technical advice and support by phone 
and email.

•  Software and hardware upgrades.
•  Repairs.
•  Quick supply of replacement or loan 

hardware in the event of a failure.

•  Providing export documentation for the 

return of faulty parts.

•  On site commissioning visits.
•  On site service and health check visits.
•  Emergency engineer visits.
•  On site on-air support, for complete 

peace of mind - providing operational 
guidance, and technical engineering 
support for new installations or high 
profile events.

•  Operational training.
•  Maintenance / technical training.
•  Supply of replacement components.
•  Supply of documentation.

Servicecontracts

We offer a range service contracts to our 
UK and Ireland customers, offering 24/7 
telephone support, regular health checks 
and extended warranty amongst other 
benefits.  Please contact our customer 
support team for more information on 
service contracts.

ProductWarranty

A full list of our conditions & warranties 
relating to Goods & Services is contained 
in the Company’s standard Terms and 
Conditions.  A copy of this is available on 
request.

Repairs

If you need to return goods to Calrec, for 
whatever reason, please contact your 
regional distributor or Calrec customer 
support beforehand for guidance, as 
well as to log the details of the problem 
and receive a reference number.  For 
customers outside the UK and Ireland, 
shipping via the distributor saves 
customers from dealing with exportation 
paperwork.  If there is a need to send 
direct to Calrec, contact us beforehand to 
log the incoming repair and for assistance 
with exportation documents.

StandardofService

Ensuring the highest standards is a 
priority, if you have any comments on 
the level of service, product quality 
or documentation offered to you by 
Calrec, please contact the Calrec 
Customer Support team in the UK who 
will endeavour to address the issues.      
Calrec welcomes all customer feedback.

For feedback specific to this document, 
please contact [email protected].

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Maestro MR500 Owner'S Manual preview
MR500
Бренд: Maestro Страницы: 48
Yamaha MW10 Mode D'Emploi preview
MW10
Бренд: Yamaha Страницы: 36
Dash delish DCSM350 Instruction Manual preview
delish DCSM350
Бренд: Dash Страницы: 25
Yamaha MG206C Manual De Instrucciones preview
MG206C
Бренд: Yamaha Страницы: 29
Yamaha PM5D Supplementary Manual preview
PM5D
Бренд: Yamaha Страницы: 2
Yamaha M7CL StageMix V1.5 Supplementary Manual preview
M7CL StageMix V1.5
Бренд: Yamaha Страницы: 4
Yamaha RM1x Data List preview
RM1x
Бренд: Yamaha Страницы: 24
Yamaha LS9 Editor Supplementary Manual preview
LS9 Editor
Бренд: Yamaha Страницы: 4
Carat 50 SUPER Operating Instructions Manual preview
50 SUPER
Бренд: Carat Страницы: 44
Jata hogar AC57 Instructions For Use Manual preview
AC57
Бренд: Jata hogar Страницы: 16
Boss RC-30 Service Notes preview
RC-30
Бренд: Boss Страницы: 31
D'Andrea SUPER BAWL WHINE-O-WAH with THMBS Snarling Instruction Manual preview
SUPER BAWL WHINE-O-WAH with THMBS
Бренд: D'Andrea Страницы: 2
Kambrook KHM300 Series Instruction Booklet preview
KHM300 Series
Бренд: Kambrook Страницы: 24
SAMES KREMLIN PU 3000 Documentation preview
PU 3000
Бренд: SAMES KREMLIN Страницы: 152
Russell Hobbs 18275-56 Insrtructions preview
18275-56
Бренд: Russell Hobbs Страницы: 46
Fulltone Catalyst CT-1 Quick Manual preview
Catalyst CT-1
Бренд: Fulltone Страницы: 2
MQ Multiquip WHITEMAN Series Manual preview
WHITEMAN Series
Бренд: MQ Multiquip Страницы: 26
Franke 2030040374 Installation And Operating Instructions Manual preview
2030040374
Бренд: Franke Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды