manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

64    ARTEMIS 

Digital Broadcast Production Console

Getting Signals Into Artemis

TONE / OSCILLATOR CONTROLS

There are many tone injection points 
within the Artemis DSP to aid with 
path checking and line-up. 

Tone can be routed in the following ways:

•  To a channel or group fader’s input - 

press the fader’s ASSIGN button and 
select TONE in the lower left hand 
corner of any PROCESSING mode  
TFT screen.

•  To Track outputs - press the rotary 

controller for the required track output 
when in the OUTPUTS panel mode to 
bring up extra controls including tone 
switching, then select TONE>TRACK

•  To Aux outputs - press the rotary 

controller for the required aux output 
when in the OUTPUTS panel mode to 
bring up extra controls including tone 
switching, then select TONE>AUX

•  To Group Outputs - press the rotary 

controller for the required group output 
when in the OUTPUTS panel mode to 
bring up extra controls including tone 
switching, then select TONE>GROUP

•  To Main outputs - press the rotary 

controller for the required main output 
when in the OUTPUTS panel mode to 
bring up extra controls including tone 
switching, then select TONE>MAIN

•  To Main outputs from the 4 faders on 

the monitor panel - If main outputs 
are assigned to these faders, and the 
panel is not in downmix or spill levels 
mode, the button just above each fader 
becomes a Tone selector.

Changing the mode of panels or the 
assigned focus by selecting a different 
fader or output bus does not clear the 
tone.  Tone will remain until deselected or 
globally cleared.

FIG 2 - OSCILLATOR CONTROLS

The Oscillator functions provide 
control over internal tone parameters 
and allow the option to override the 
internal tone generator with external 
or ‘house’ tone.

These controls can be accessed from any 
fader panel by pressing TOOLS and then 
OSCILLATOR on any fader panel’s ‘mode’ 
row, see Fig 1. The oscillator controls will 
then be displayed in the Functions row 
above, as shown in Fig 2 below.

OscillatorParameters

The Functions row provides controls to 
adjust the internal oscillator’s level and 
frequency, including a repeating tone 
sweep function and mute options for each 
leg of the accessed path .  

•  Frequency ranges cover the band from 

20Hz to 20kHz.

•  Level is displayed in both dBFS and 

dBU. 

•  The oscillator sweep is stepped and 

runs from 20Hz to 20kHz. 

•  The < and > buttons allow you to 

change the direction of the sweep. 

•  Pressing and holding ‘1kHz’ or ‘Ref 

Level’ will reset to the default values. 

Note, the default level value is intended 
to match your regional or chosen running 
levels and line-ups, e.g. for the US, the 
default lineup setting is -4dBU 
whereas for the UK it is -18dBFS/0dBU.  

If your line-up levels are not as expected 
please contact your engineering support 
or Calrec support at [email protected].

FIG 1 - TONE CONTROL - BUS OUTPUTS

•  O/P panel shown after Aux 1 rotary control press

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Profi Cook PC-UM 1127 Instruction Manual preview
PC-UM 1127
Бренд: Profi Cook Страницы: 70
MegaBeat Audio Loop Skywalker User Manual preview
Loop Skywalker
Бренд: MegaBeat Audio Страницы: 5
L.R. Baggs ALIGN SERIES REVERB User Manual preview
ALIGN SERIES REVERB
Бренд: L.R. Baggs Страницы: 8
EarthQuaker Devices Astral Destiny Operation Manual preview
Astral Destiny
Бренд: EarthQuaker Devices Страницы: 23
Eclectro-Harmonix Bass9 Manual preview
Bass9
Бренд: Eclectro-Harmonix Страницы: 6
Heinner HPM-1500XMC Instruction Manual preview
HPM-1500XMC
Бренд: Heinner Страницы: 45
Heinner HM-250WHSL Instruction Manual preview
HM-250WHSL
Бренд: Heinner Страницы: 36
Donner Verb Square Owner'S Manual preview
Verb Square
Бренд: Donner Страницы: 2
Donner Tap Delay Owner'S Manual preview
Tap Delay
Бренд: Donner Страницы: 2
CHEFOOK CHPLZ7 Instruction Manual preview
CHPLZ7
Бренд: CHEFOOK Страницы: 19
Altrad Lescha LZ 100 Original Instructions Manual preview
LZ 100
Бренд: Altrad Lescha Страницы: 28
Alto AMX-120 User Manual preview
AMX-120
Бренд: Alto Страницы: 20
BVE SENZA Manual preview
SENZA
Бренд: BVE Страницы: 9
T-Rex TREMSTER User Manual preview
TREMSTER
Бренд: T-Rex Страницы: 5
T-Rex Twin Boost User Manual preview
Twin Boost
Бренд: T-Rex Страницы: 5
T-Rex ToneBug Series User Manual preview
ToneBug Series
Бренд: T-Rex Страницы: 5
Highland 3846379 Manual preview
3846379
Бренд: Highland Страницы: 20
YORKVILLE AP1212 Service Manual preview
AP1212
Бренд: YORKVILLE Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды