manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

124   ARTEMIS 

Digital Broadcast Production Console

Monitoring

AFL AND PFL AND OUTPUT LISTEN

Artemis consoles have a 
comprehensive multi-user AFL, PFL 
and Output Listen system.

AFL

Selecting an AFL - ‘After Fader Listen’, 
replaces the output of the control room 
monitor with the post fader audio of the 
path being AFLd.  AFL provides a ‘non-
destructive solo’- Only the control room 
monitor output is affected, no paths are 
cut, and mixes to all other buses and 
outputs are unaffected, allowing users 
to quality-check selected paths whilst 
maintaining all mixes. 

Whilst in AFL mode, the control room 
monitor selection display will indicate as 
AFL.  When all AFLs are switched off, 
or globally cancelled, the monitoring will 
revert to outputting its previously selected 
source.

PFL

PFL - ‘Pre Fader Listen’ is sent by default 
to a dedicated PFL/RTB LS output    
(RTB is ‘Reverse talkback’ which allows 
for signals to be mixed with PFL for 
listening on the PFL/RTB output e.g for 
use with producer / director hot-mics). 

Multiple paths can be PFLd or AFLd at 
the same time, creating a summed mix of 
pre or post fader path solos.

FIG 1 - FADER AFL & PFL CONTROLS

FIG 2 - ACCESSING AFL AND PFL FOR OUTPUT BUSES

FIG 3 - APFL INDICATOR / CLEAR BUTTON ON BROADCAST FACILITIES PANEL

OutputListen(OPL)

Mains, Tracks, Auxs and Direct Outputs 
all have an OUTPUT LISTEN option.  Like 
AFL, this provides a non-destructive solo, 
but output listen takes the feed after the 
addition of output delay, directly before the 
feed leaves the console.

Accessfromfaders

When a path is attached to a fader, AFL 
and PFL can be accessed using the AFL 
and PFL buttons.  Both are either latching 
if tapped briefly, or momentary if held. 

By default, PFL is automatically cancelled 
when a fader is opened e.g if a fader 
reaches 

∞

 whilst PFL is activated, PFL will 

be deactivated when the fader reaches 
-90dB.  

This feature can be disabled by turning off 
the OPEN FADER CANCELS PFL button 
within the TOOLS>MISC menu.

PFL can also be activated using the fader 
overpress feature: Move the fader down to 
its lowest position, then push it down past 
the normal backstop position and PFL 
activates for that fader.  See Fig 1.

This is a momentary setting so as soon as 
you release the fader, PFL is deactivated.        
If you wish to disable this feature, navigate 
to ‘Show Settings’, then select ‘Misc 
Settings’ from the left hand button menu 
and click DISABLE for the PFL overpress 
option.

AccessbusAFL,PFLandOPL

When in Outputs mode, any bus can 
be brought into focus in the button cell 
row by pushing down on the output’s 
rotary control.  Once an output is in focus 
options appear in the button cell row for 
activating PFL and AFL (or OutPut Listen) 
for the currently assigned path. See Fig 2.

AccessAFLinContributionMode

When in Contribution mode any Auxiliary, 
Track or Group bus can be AFLd by 
switching ON on the AFL Selected Aux, 
Track and/or Group slider and pressing 
the required Bus on the screen.  

Note that when another bus is selected 
the previous bus AFL is turned off.  When 
used in conjunction with the ‘AUX SEND 
LEVELS’ option the user can listen to the 
bus whilst adjusting the levels being sent 
to it.  See 

”Contribution Mode” on page 

101

 for details.

Latching or 

momentary AFL 

using the AFL 

button.

Latching or 

momentary PFL 

using the PFL 

button.

Overpress (push 

the fader lower 

than the normal 

backstop) to 

activate PFL.

AFL

PFL

DIR 

TB

ISO

AFL

PFL

DIR 

TB

ISO

AFL

PFL

DIR 

TB

ISO

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Idex GX300 Manual preview
GX300
Бренд: Idex Страницы: 29
Harley Benton BCH-1 User Manual preview
BCH-1
Бренд: Harley Benton Страницы: 24
Jands Stage Manual preview
Stage
Бренд: Jands Страницы: 17
Carat 50 SUPER Operating Instructions Manual preview
50 SUPER
Бренд: Carat Страницы: 44
Behringer Super Flanger SF400 User Manual preview
Super Flanger SF400
Бренд: Behringer Страницы: 2
Kawai 4 Channel 8 Input Mixer MX-4S Product Manual preview
4 Channel 8 Input Mixer MX-4S
Бренд: Kawai Страницы: 6
Mission VM-PRO Configuration Manual preview
VM-PRO
Бренд: Mission Страницы: 2
NSI NCM 7216 Operation Manual preview
NCM 7216
Бренд: NSI Страницы: 36
Behringer TRUTH B2030A Quick Start Manual preview
TRUTH B2030A
Бренд: Behringer Страницы: 24
PhDsolutions HDMIDAC2 User Manual preview
HDMIDAC2
Бренд: PhDsolutions Страницы: 15
Shure M63 AUDIO MASTER Techical Data preview
M63 AUDIO MASTER
Бренд: Shure Страницы: 6
Russell Hobbs 14451 Instructions Manual preview
14451
Бренд: Russell Hobbs Страницы: 8
Scarlett SC-HM40S19 Instruction Manual preview
SC-HM40S19
Бренд: Scarlett Страницы: 16
Scarlett SC-HM40S03 Instruction Manual preview
SC-HM40S03
Бренд: Scarlett Страницы: 13
Scarlett Silver Line SC-HM40S10 Instruction Manual preview
Silver Line SC-HM40S10
Бренд: Scarlett Страницы: 32
SoundCraft Vi Series Technical Information preview
Vi Series
Бренд: SoundCraft Страницы: 12
SoundCraft 200BVE User Manual preview
200BVE
Бренд: SoundCraft Страницы: 41
MBW MM60 Operator'S Safety And Service Manual preview
MM60
Бренд: MBW Страницы: 33

Бренды по названию

Популярные бренды

Загрузить еще бренды