manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

88    ARTEMIS 

Digital Broadcast Production Console

Processing Audio

VCASlavesmovewithVCAMasters

By default slave and secondary master 
faders move along with their masters 
to show their individual, relative levels. 
This feature can be disabled if preferred: 
Within the main application, navigate to 

>Show Settings>General Settings.  

The last option in that screen is to enable 
or disable ‘VCA Slaves move with VCA 
Masters’.  If the feature is disabled, slaves 
and secondary master faders will no 
longer move in-line with their masters 
but their nulling indicators will light 
appropriately to show whether the actual 
level is above or below that being shown 
by the fader position.

VCAoperationwithRemote
Productionunits

The existing mechanism for creating VCA 
groups has been extended to allow VCA 
control of Remote Faders on an RP1 unit 
by selecting a path or blank fader on the 
host console as the VCA Master, pressing 
and holding down its Assign button on 
the console surface and then pressing the 
assign buttons of those Remote Fader 
paths that are to be VCA slaves to that 
VCA master.  

There are rules about connecting Remote 
faders that differ from the normal VCA 
system.  The detailed operation and 
integration of the RP1 remote production 
unit with the Apollo and Artemis console 
range is the subject of a separate manual 

Remote Production RP1  System Manual

 

(926-222)  

downloadable from the Calrec 

website.  In that manual, is a chapter 
called ‘Operation Via Host Console’ which 
shows how to setup and operate the RP1 
remote production unit via a host console 
in this case an Artemis.

VCAgroupinterrogation

Interrogation works in a similar way 
to the routing interrogation feature.  It 
provides a clear way of indicating group 
assignment using the path assign buttons. 
As with creating a group, interrogation is 
performed by holding the assign button of 
the path to be interrogated.  A number of 
different situations exist:

•  The interrogation of a master will 

illuminate all the assign buttons of its 
slaves.  If any intermediates exist which 
are controlled by the selected master, 
their assign buttons will strobe slowly. 
The slaves of the intermediate will not 
be lit.

•  The interrogation of an intermediate 

will illuminate all the assign buttons 
of its slaves.  The assign button of its 
master will strobe quickly.

•  Interrogating a slave of a master will 

cause the master’s assign button to 
strobe quickly.

•  The interrogation of a slave of 

an intermediate will strobe the 
intermediate’s assign button slowly 
and the intermediate’s master’s assign 
button quickly.

While holding an assign button, only the 
assign buttons relevant to the VCA group 
will illuminate or strobe.  The rest will be 
unlit for clarity.

Masters&slavesonthesamefader

Masters can be created on a faders which 
do not contain a path.  They can also be 
created on faders which already have a 
path attached to them.  In this case, the 
path on the fader becomes a slave of the 
master.  The master and the new slave 
beneath it can be accessed and controlled 
in different ways.

Normally any changes to the fader level, 
cut or APFL status will apply to the master 
and subsequently all slaves in the group. 
If the fader assign button is held down, 
then the changes will apply to the slave 
beneath the master. 

If the fader is assigned but the button 
not held down, any alterations to EQ, 
dynamics and routing for example 

will apply to the slave only as normal. 
Processing outside of fader level, cut 
and APFL status does not apply to VCA 
groups.

Faderlevelindicator

Touching a fader will display its level in 
the screen above.  This indicator will 
disappear after a short period of time.

Nullingindicators

If the combined level of a master and 
slave is greater than +10dB or less than 
-100dB, the slave fader will remain at 
the appropriate end of its travel and the 
relevant up or down nulling indicator will 
be illuminated.  The nulling indicators are 
shown in Fig 3.

Preservingbalanceofslavesatlow
levels

When a master is set to a level below 
-50dB, its slaves cannot be altered. 
Altering the levels of slaves when the 
master is turned down to this degree 
would most likely produce inaudible 
results.  To preserve the balance of the 
group and to prevent any signals being 
turned up excessively when the master 
is raised, this restriction has been put in 
place.  In this case, both nulling LEDs on 
the slaves will illuminate.

5.1Surroundchannels

If a surround master is part of a VCA 
group then the VCA primary and 
secondary master levels, cut settings 
and APFL settings affect all of its spill 
legs.  It is not possible for the spill faders 
themselves to be masters or slaves of a 
VCA group.

VCAgroupprotection

Within the TOOLS menu under MISC 
there is a VCA GROUP EDIT DISABLE 
option.  The default status of this option is 
off but it can be switched on to stop any 
changes being made to VCA groups. 

 VCA groups created before this option 
is turned on will still be operational but if 
changes to VCA group organization are 
attempted a VCA EDIT DISABLE warning 
will be displayed in the corresponding 
fader label display.

FIG 3 - NULLING INDICATORS

CUT

AFL

PFL

DIR 

TB

ISO

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Jands Stage Manual preview
Stage
Бренд: Jands Страницы: 17
Nakamichi MX-100 Owner'S Manual preview
MX-100
Бренд: Nakamichi Страницы: 5
Zapi SMART CONSOLE Manual preview
SMART CONSOLE
Бренд: Zapi Страницы: 11
Yamaha RACK Reference Manual preview
RACK
Бренд: Yamaha Страницы: 103
Fender 0234573000 Owner'S Manual preview
0234573000
Бренд: Fender Страницы: 9
HQ Power PROMIX60 Manual preview
PROMIX60
Бренд: HQ Power Страницы: 12
DigiTech BRIAN MAY RED SPECIAL PEDAL Owner'S Manual preview
BRIAN MAY RED SPECIAL PEDAL
Бренд: DigiTech Страницы: 17
JamHub BedRoom Owner'S Manual preview
BedRoom
Бренд: JamHub Страницы: 12
Akai QX-D3100 Service Manual preview
QX-D3100
Бренд: Akai Страницы: 20
Harman Soundcraft Si impact User Manual preview
Soundcraft Si impact
Бренд: Harman Страницы: 132
Fulltone Deja’Vibe MDV-3 Manual preview
Deja’Vibe MDV-3
Бренд: Fulltone Страницы: 2
Whirlwind The Bomb Manual preview
The Bomb
Бренд: Whirlwind Страницы: 2
T-Rex Twister User Manual preview
Twister
Бренд: T-Rex Страницы: 5
T-Rex ToneBug User Manual preview
ToneBug
Бренд: T-Rex Страницы: 5
T-Rex The Sweeper User Manual preview
The Sweeper
Бренд: T-Rex Страницы: 5
T-Rex SQUEEZER User Manual preview
SQUEEZER
Бренд: T-Rex Страницы: 7
T-Rex SPINDOCTOR 2 User Manual preview
SPINDOCTOR 2
Бренд: T-Rex Страницы: 7
T-Rex Mean Machine User Manual preview
Mean Machine
Бренд: T-Rex Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды