manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

194   ARTEMIS 

Digital Broadcast Production Console

Features by Software Version

V4.0

•  Send Levels on Faders, surface faders 

can now show their send level to a 
selected Aux, instead of their usual 
path level, allowing Aux mixes to be 
easily produced.

•  Routing and Reverse routing reworked, 

now known as Contribution Mode 
with improved routing indication and 
handling of individual legs belonging to 
multichannel paths.

•  When viewing contribution to an Aux, 

Track or Group, user can automatically 
AFL the selected bus.

•  User can change the default send 

position for all paths routable to Mix 
Minus and Aux buses.

•  Surface Display improvements:-   

Touching a fader highlights the relevant 
upstand meter.

     Current assign upstand meter
     highlights in blue to match the fader
     display and indicator LED.
     Undefined buses are no longer 
     displayed. 
     Artemis now displays 16 Auxs in the 
     Sends-Routes page rather than 8 to
     match Apollo.
     Fader displays indicate when 
     connected source is offline.
•  Admin protection for bus widths,  

Admin users can prevent the width of 
each bus output from being changed 
by regular users. 

V4.0.1

•  Restricted H2O User Account -H2O 

previously only provided an “Admin” 
account.  There is now a “User”

     account which provides limited access
     to a small range of H2O functions. 
•  The following functions are available to 

the H2O User account:

     Full access to the “Port Patching”  
     screen, including:
        Patching sources to destinations
        Control of source settings 
 

 

Mic Gain / 48V and AES3 SRC)

        Creating and recalling Salvos
        Control of source settings from the 
                “I/O Box and Port Labels” screen
        Read-only access to all remaining
         

H2O screens and functions.

V6.0

•  Patching Shortcut - Shortcuts have 

been built into the Apollo and Artemis 
surfaces and the main application, 
which  dramatically speed up patching 
workflow.

•  Ember+ GPIO - adds 256 Virtual GPIs 

and GPOs, available over the Ember+ 
protocol.  Virtual GPIO can control and 
respond to all functions that have been 
available to traditional physical GPIO.

•  Receive External Source Labels via 

SW-P-08 - Apollo and Artemis can 
now receive and display external labels 
over SW-P-08.  

•  Path labelling has been improved 

providing consistency across all path 
widths and types.  There is a hierarchy 
of labels available: from system defined 
default labels, through network level 
user labels, all the way up to user 
defined path labels.

•  The fader setup screen now follows 

fader access on the surface, just like 
the patching screen.

•  Changes to Show data structures on 

Apollo and Artemis - this data structure 
has changed, and each show now 
contains its own meter layout and its 
own user split configuration.  

•  Meter Presets - the user can now 

export a show’s meter layout into a 
Meter Layout Preset for use with other 
shows.

•  Changes to the Show backup format 

on Apollo and Artemis - Each show 
backup, is now contained in its own file, 
with a “.CalrecShow” extension.  

•  Changes to the location of screens in  

the Apollo & Artemis main application - 

     For a long time, the Apollo and Artemis
     main application has grouped functions 
     under the top-level menu items     
     “Other Options” and “Fixed Options”.
     These titles have been changed to
     “Show Settings” and “System Settings”
     respectively.  The screens contained 
     under each of these top-level menus 
     have been moved and in some cases
     renamed to make them easier to find. 
See 

“Changes to Screen Locations in the 

Main Application from V6.0” on page 15.

V7.0

 

•  Auxes and Tracks Can Be Assigned to 

Faders - the user can now assign Aux 
and Track buses to faders, in the same 
way as Channels, Groups, and Mains.

•  Improvements to the Memory Isolate 

System - Mains, Auxes, and Tracks can 
now be isolated in the same way as 
Channels and Groups.

•  When a bus is patched to a destination, 

and that destination is isolated, the 
width of the relevant bus is also 
isolated.  Conversely, and if appropriate, 
when a bus is isolated, all the 
destinations to which it is connected 
can also be isolated automatically.

•  Support for Monitoring Immersive 

Signals from an External Source- a 

    new option “Immersive Monitoring” 
     is now available in “>Show Settings
    >General Settings” screen of the main
    application.  When this option is 
    enabled, the Misc LS 1 output in
    Monitor System 1 is linked to the Main
    LS output, allowing external 5.1.2 or 
    5.1.4 signals to be easily monitored.
•  Calrec Automation System Option, for 
     recording, replaying, and editing of 
     control data for mixes.
•  Support for AoIP box, for direct 

integration with a range of IP networks.

•  Support for H2Hub, allowing multiple
     remote I/O boxes to be consolidated 
     onto a single, larger Hydra2 link.
•  Support for SW-P-08 Extended tally 

dump

•  Long fader labels are no longer 

truncated with an ellipsis in the fader 
displays, allowing for more of the label 
to be visible

•  The number prefix for bus labels on the 

upstand meters has been shortened to 
allow more of the label to be visible

•  Improvements to the handling of VCA 

slave faders at low levels when the 
master is below 0 dB.

•  Improvements to the SNMP system.

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

KAM Powerhead PA Mixer Instruction Manual preview
Powerhead PA Mixer
Бренд: KAM Страницы: 4
Mackie MicroSeries 1202 Owner'S Manual preview
MicroSeries 1202
Бренд: Mackie Страницы: 15
Valcom V-9983 Instructions Manual preview
V-9983
Бренд: Valcom Страницы: 6
Jata hogar AC57 Instructions For Use Manual preview
AC57
Бренд: Jata hogar Страницы: 16
Studer SW V4.0 OnAir 1000 Operating And Service Instructions preview
SW V4.0 OnAir 1000
Бренд: Studer Страницы: 361
Bake Cool Magic Mixer Instruction Manual preview
Magic Mixer
Бренд: Bake Cool Страницы: 2
Cloud CX163 Installation And User Manual preview
CX163
Бренд: Cloud Страницы: 20
Peavey SMR 821a Specification preview
SMR 821a
Бренд: Peavey Страницы: 4
RUSTA KITCHEN GEAR 900701410101 Manual preview
KITCHEN GEAR 900701410101
Бренд: RUSTA Страницы: 28
Nady Audio MM-141 Owner'S Manual preview
MM-141
Бренд: Nady Audio Страницы: 2
Doyon DOMIX45 User Instruction Manual preview
DOMIX45
Бренд: Doyon Страницы: 32
Electrolux Dito XBMF20AXT3 Specifications preview
Dito XBMF20AXT3
Бренд: Electrolux Страницы: 4
Electrolux Dito XBM30 Brochure & Specs preview
Dito XBM30
Бренд: Electrolux Страницы: 4
Electrolux Dito XBMF20AST5 Specifications preview
Dito XBMF20AST5
Бренд: Electrolux Страницы: 4
Electrolux Dito XBMF30SX3 Specifications preview
Dito XBMF30SX3
Бренд: Electrolux Страницы: 4
Daktronics ALL SPORT 5500 SERIES Operation Manual preview
ALL SPORT 5500 SERIES
Бренд: Daktronics Страницы: 108
Sony MHC-GX555 - Mini Hi Fi Component System Operating Instructions Manual preview
MHC-GX555 - Mini Hi Fi Component System
Бренд: Sony Страницы: 44
thomann The t.mix 16.4 User Manual preview
The t.mix 16.4
Бренд: thomann Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды