manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

CALREC 

Putting Sound in the Picture

 

45

Select 

TOOLS>FADER ASSIGNMENT

 

from the Modes row, and then NEW 
CHANS from the row above to display 
the input channel types available for 
allocation.

Select a blank fader by pressing its’ 
assign button above (A layer) or below (B 
layer) its label display to highlight it blue 
and make it the currently assigned path - 
the focus of assignable controls.  

From the New Chans menu, select a 
width of input channel to allocate to the 
fader – 5.1 surround, stereo or mono.  On 
releasing the button, a DSP input channel 
of the chosen width is instantly allocated 
to the assigned fader and its label display 
is updated accordingly.

Paths of the same width can quickly be 
assigned to multiple faders by holding a 
channel width button down whilst then 
selecting the assign buttons of the blank 
faders to allocate the channels to. 

Once a fader has a signal path on it, the 
path type or width cannot be changed, 
the path must first be removed before a 
different path can be allocated.

When assigning input channels to paths in 
this way, a new input channel is allocated 
to each fader from the available DSP 
resource pool.  DSP resources are quoted 
in mono channel legs.  When a stereo 
channel is allocated, 2 mono paths are 
used from the resource pool, and 6 are 
used to create a 5.1 surround channel.

Assigningbusestofaders

Main Output buses and audio sub-group 
buses that have been configured can also 
be allocated to faders if required. 

Selecting Mains or Groups from the 
Tools>Fader Assignment menu displays 
the relevant bus types that are available. 
If more groups are available than can be 
displayed across the panel, buttons will be 
present to allow the view to page through 
the different groups.

Selecting a Main or group will allocate 
that DSP path to the currently assigned 
fader as long as the fader does not 
already have a path allocated.  

Main output paths can also be allocated 
to the faders on the dedicated monitor 
panel if the full-featured version with 
faders is fitted.  When allocating to 
these faders, ensure the panel is not 
in spill or Downmix mode.  Unlike input 
channels which are configured as they 
are allocated to faders, the buses need 
to already be configured from the main 
application 

>Operate>Bus Config

 

screen.  Please see the Buses Overview 
section for more detail.  Each numbered 
Main or group is a unique bus signal path.  

If the same Main or group bus, e.g. ‘Main1’ 
is allocated to more than one fader, 
each fader is controlling the same bus 
path and adjustment of any of them will 
be reflected by the others.  Cloning bus 
faders in this way can be useful to provide 
access to a bus from different physical 
locations or different fader layers.

Assigningauxsandtrackstofaders
intheToolsmenu

From V7.0 it is possible to assign auxs 
and tracks to faders from the Tools menu 
in exactly the same way as groups & 
mains. See Fig 4 on the previous page.  
The aux buses are arranged in two pages 
of 16 for up to 32 auxs and the track 
buses arranged in four pages of 16 for up 
to 64 tracks.

Removingpathsfromafaders

Pressing the Layer Tools button at 
the right hand side of the modes row 
brings up the Layer Tools menu on the 
row above.  Pressing and releasing the 
CLEAR PATH button in this menu then 
highlights the CNCL & EXEC buttons in 
the same row.  See Fig 6.

Pressing EXEC executes the clear path 
command on the currently assigned fader, 
removing any signal paths allocated.  

The CNCL button instead cancels the 
operation.  To clear multiple paths from 
the surface, press and hold the CLEAR 
PATH button whilst selecting the faders to 
be cleared using their assign buttons.  The 
EXEC / CNCL buttons are again used to 
confirm execution or cancel the operation.

Clearing an input channel path from a 
fader removes that unique path and all 
settings associated with it from the control 
surface.  If a channel path is re-allocated, 
to the fader, a new channel with default 
settings is applied.  

Clearing a main, group, aux or track bus 
from a fader only clears the signal path 
from that fader.  The main, group, aux and 
track buses are still active within DSP 
and passing audio.  The path can still be 
adjusted and selected as the currently 
assigned path for further control from the 
OUTPUTS panel mode.

FIG 6 - LAYER TOOLS MENU

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Magic Bullet MBR03 Quick Manual preview
MBR03
Бренд: Magic Bullet Страницы: 5
Rolls MX153 MixMate Datasheet preview
MX153 MixMate
Бренд: Rolls Страницы: 1
Behringer PB600 Manual preview
PB600
Бренд: Behringer Страницы: 3
SoundCraft lx7 II User Manual preview
lx7 II
Бренд: SoundCraft Страницы: 32
FAME Chorus LEF-304 User Manual preview
Chorus LEF-304
Бренд: FAME Страницы: 15
Tower Hobbies T12039 Safety And Instruction Manual preview
T12039
Бренд: Tower Hobbies Страницы: 16
American Audio Q-221 Instruction Manual preview
Q-221
Бренд: American Audio Страницы: 14
Ozito OZMM1010A Operation Manual preview
OZMM1010A
Бренд: Ozito Страницы: 8
Ozito DMM-080U Original Instructions Manual preview
DMM-080U
Бренд: Ozito Страницы: 8
Samson SASM4 Owner'S Manual preview
SASM4
Бренд: Samson Страницы: 12
Samson Txm16 Owner'S Manual preview
Txm16
Бренд: Samson Страницы: 32
Samson TM 500 Owner'S Manual preview
TM 500
Бренд: Samson Страницы: 60
Tapco 6306 Owner'S Manual preview
6306
Бренд: Tapco Страницы: 20
Audio Technica ATDM-0604 User Manual preview
ATDM-0604
Бренд: Audio Technica Страницы: 80
Lithium Grim Purple Vibe Building Instructions preview
Purple Vibe
Бренд: Lithium Grim Страницы: 18
thomann Source Mix 18R User Manual preview
Source Mix 18R
Бренд: thomann Страницы: 28
Wheatstone Corporation E1 Technical Manual preview
E1
Бренд: Wheatstone Corporation Страницы: 92
Rocktron MULTVALVE User Manual preview
MULTVALVE
Бренд: Rocktron Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды