manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

CALREC 

Putting Sound in the Picture

 

83

To apply independent EQ and dynamics 
settings to a surround path element, 
the required element needs to have 
independence set for the EQ band / 
dynamics processors required.  By default, 
when a new surround path is allocated, 
the LFE channel is set to be independent 
for all EQ and dynamics, meaning that any 
EQ / dynamics parameters set whilst the 
surround path’s master fader is assigned 
will not affect the LFE channel.

Independencestatusindicators

The two displays below the central faders 
show the EQ & dynamics independence 
status for each of the elements of the 
currently assigned path.  See Previous 
page.  When viewing EQ and dynamics 
settings of a stereo/surround element, if 
independence is not set for a particular 
parameter, the controls will display 
S.MSTR, indicating that the parameter 
is set from the master and cannot be 
adjusted.  Selecting INDEP makes that 
parameter independent, causing it to 
ignore any settings applied to the master 
and to allow adjustment for the current 
path element only.  Selecting INDEP will 
also update the independence displays 
beneath the spill faders.

EQindependence

Independence can be set for each band of 
EQ. Fig 1 to the right shows EQ controls 
for bands 1 & 2 with a surround spill 
element the assigned path.  The controls 
are shown with independence not set.  

To apply independent EQ, switch to 
PROCESSING-Overview mode or 
PROCESSING-EQ mode and press 
the INDEP button next to the EQ band  
you wish to make independent for the 
assigned leg.  This band can now be 
adjusted to process the assigned leg 
independently from the surround master.

EQ bands still following the surround 
master settings displays the text S.MSTR 
see Fig 1.  Adjustments to EQ bands still 
following the surround master will also 
affect all other legs in the path.  Note that 
switching off the equaliser independence 
of an EQ band restores its the Surround 
Master Path settings.

Also note the Reset Independence 
EQ button on the TFT screens resets 
the values to default for legs set to be 
independent, it does not remove their 
independence. 

Dynamicsindependence

Fig 2 shows a portion of dynamics 
controls (viewing dynamics processor 1)
with a surround spill element assigned. 
The independence over dynamics settings 
for the assigned surround element are 
switched for gain reduction independence 
and control of legs for stereo and 5.1 path 
legs on the PROCESSING-DYNAMICS 
mode TFT screen.  By making the 
dynamics gain reduction independent for 
a given leg, that leg will only have gain 
reduction applied when it crosses the 
threshold itself.  The control values remain 
common with the surround master, but the 
leg will be processed independently.

To make the dynamics gain reduction 
linking independent, assign the required 
leg of the surround master switch to:- 
PROCESSING - DYN1 mode and tap 
the DYN1 Gain Reduction independence 
button (or the PROCESSING-DYN2 mode 
equivalent to make the second dynamics 
unit linking independent).  This is shown 
on the right hand side of the TFT screen.

To make dynamics controls independent, 
assign the required leg of the surround 
master go to:- PROCESSING-DYN1 
mode and tap the Control Independence 
button (or the PROCESSING-DYN2 
mode equivalent to make the second 
dynamics unit  independent).  This is 
also shown on the right hand side of the 
TFT screen. If the dynamics linking is not 
made independent, the paths would be 
processed according to the first path to 
cross the threshold, but their thresholds 
and other parameters may be set 
independently. 

When gain reductions are linked, but 
control is independent, different dynamics 
parameters, such as threshold and ratio 
can be set for the elements, but the same 
amount of gain reduction will be applied 
to all gain reduction linked elements 

FIG 1- EQ FOR SPILL

FIG 2 - DYN FOR SPILL

if the audio on any of them crosses 
their threshold settings.  This allows for 
different dynamics settings to be applied 
to each element whilst maintaining the 
overall mix level between them.  If gain 
reduction independence is set for an 
element, gain reduction will only ever 
be applied to that element if the audio if 
its own audio crosses its own threshold 
settings.  As well as EQ & dynamics, other 
settings can be applied to elements of a 
stereo/surround path that do not require 
an independence setting, such as input 
gain and routing.  

These parameters can simply be selected 
or adjusted whilst the stereo/surround 
element is the currently assigned path. 
Note that switching off the Dynamics 
Independence for that control restores its 
Surround Master Path settings.

PROCESSING INDEPENDENCE

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Varimixer W30 Motor Removal Instructions preview
W30
Бренд: Varimixer Страницы: 3
Dynamic MDH 2000 User Manual preview
MDH 2000
Бренд: Dynamic Страницы: 16
Redmond HM1008G-UL User Manual preview
HM1008G-UL
Бренд: Redmond Страницы: 7
Midas VeniceF Application Manual preview
VeniceF
Бренд: Midas Страницы: 12
RONDELL RDE-1350 Manual Instruction preview
RDE-1350
Бренд: RONDELL Страницы: 20
Vonyx 172.974 Instruction Manual preview
172.974
Бренд: Vonyx Страницы: 16
SoundCraft Series Two User Manual preview
Series Two
Бренд: SoundCraft Страницы: 56
Hkoenig KM124 Instruction Manual preview
KM124
Бренд: Hkoenig Страницы: 77
Tascam 644 Midistudio Owner'S Manual preview
644 Midistudio
Бренд: Tascam Страницы: 56
AEG HM 190 Instructions For Use preview
HM 190
Бренд: AEG Страницы: 5
Solidyne MX 2400 User Manual preview
MX 2400
Бренд: Solidyne Страницы: 30
EarthQuaker Devices Cloven Hoof Operation Manual preview
Cloven Hoof
Бренд: EarthQuaker Devices Страницы: 2
Hammond XPK-200 Owner'S Manual preview
XPK-200
Бренд: Hammond Страницы: 24
Team Kalorik TKG M 1004 Operating Instructions Manual preview
TKG M 1004
Бренд: Team Kalorik Страницы: 36
Kushlan K PRO Operating Instructions And Parts Manual preview
K PRO
Бренд: Kushlan Страницы: 10
XTline ST-1600 User Manual preview
ST-1600
Бренд: XTline Страницы: 19
Dunlop CryBaby csp030 Q zone Manual preview
CryBaby csp030 Q zone
Бренд: Dunlop Страницы: 2
Dunlop CRY BABY Q ZONE QZ1 Quick Start Manual preview
CRY BABY Q ZONE QZ1
Бренд: Dunlop Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды