manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

CALREC 

Putting Sound in the Picture

 

77

AUTOMIXER

Automixers are designed to control 
audio levels for shows where there 
are multiple guests or presenters 
talking together.  Automixers adjust 
the individual microphone levels 
automatically and dynamically in order 
to pick out the people speaking, and 
to reduce the level of people that 
are not speaking, whilst maintaining 
consistent overall mix and ambient 
levels.  In reality, Automixers only ever 
apply attenuation, signals are never 
actually boosted.

Automixers are available on Calrec Apollo 
& Artemis consoles running software 
V1.12 and higher.

Each mixing console has 8 separate 
Automixers, each of which can control any 
number of mono input channels and mono 
audio group buses on the control surface. 
Stereo and surround paths, and outputs 
or buses other than groups cannot be 
assigned to automixer control.

Automixers are embedded within the 
‘Dynamics 2’ processing unit and are 
assigned using the same menu as the 
dynamics side-chain links.  See Fig 1. 

Paths assigned to automixer control 
cannot use the Dynamics 2 processor for 
normal compression / limiting at the same 
time, however the Dynamics 1 processor 
is still available for full use as compressor 
/ limiter and expander or gate.

Assigningcontrol

To assign a path to automixer control, 
select the PROCESSING-DYNAMICS2 
panel mode.  In this mode, the TFT screen 
displays the settings for the Dynamics 2 
processors.  Call attention to the chosen 
path by pressing its fader assign button. 
Select one of the eight Automixer modes 
for the Dynamics 2 processor by pressing 
one of the buttons on the TFT screen note 
that these only appear on Mono paths - if 
the path is not currently assigned to an 
Automixer or Dynamics 2 side-chain link, 

the ‘No Link’ button will be lit.  Select the 
other faders that need to be in the same 
automix group and assign them to the 
same automixer number.

To clear a path from automixer control 
(and side-chain links), select ‘No Link’ 
from the Dyn Links area on the TFT 
screen.  To place the path under the 
control of a different automixer, simply 
select a different numbered automixer. 

Gainreductionmetering

The Dynamics 2 display area shows a gain 
reduction bargraph meter and the In / 
Out status of the control for the currently 
assigned path.  Upstand bargraph meters 
for fader inputs will automatically also 
show an automixer gain reduction meter 
for each path assigned to an automixer. 
as shown in Fig 3 on the following page.

 A number at the bottom of this meter 
indicates which of the 8 automixers is 
controlling a path.  Automix gain reduction 

meters are distinct in colour and display 
from standard dynamics gain reduction 
meters.  If the automixer is not applying 
gain reduction to a path, its meter will 
display full scale to the 0 point.  

When gain reduction is applied, the meter 
drops to indicate the amount it is being 
reduced by.  See Fig 3 for an image of the 
Automixer metering in the meter bridge.

Adjustmentcontrols

The automixer controls appear when 
one of the eight automixers have been 
selected.  Buttons on the same TFT 
screen allow for the processing to occur 
post fader, pre fader (post EQ) or pre EQ 
(pre fader). 

When viewing Dynamics 2 controls with 
the currently assigned path assigned to 
an automixer, control cells on the panel 
provide two sets of controls, some for the 
Automixer as a whole and some for the 
individual assigned path. 

FIG 1 - AUTOMIXER CONTROLS ON THE PROCESSING-DYN 2 TFT SCREEN LAYOUT

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

Behringer PB600 Manual preview
PB600
Бренд: Behringer Страницы: 3
SoundCraft lx7 II User Manual preview
lx7 II
Бренд: SoundCraft Страницы: 32
Mod K-956 Instructions Manual preview
K-956
Бренд: Mod Страницы: 11
Grohe Europlus E 36 021 Manual preview
Europlus E 36 021
Бренд: Grohe Страницы: 82
Gastroback Design Handmixer Pro Operating Instructions Manual preview
Design Handmixer Pro
Бренд: Gastroback Страницы: 80
Klutch 49413 Owner'S Manual preview
49413
Бренд: Klutch Страницы: 18
Breville HANDY MIX DIGITAL BHM500XL Instruction Book preview
HANDY MIX DIGITAL BHM500XL
Бренд: Breville Страницы: 50
Behringer SUPER PHASE SHIFTER SP400 Manual preview
SUPER PHASE SHIFTER SP400
Бренд: Behringer Страницы: 2
MORLEY POWER WAH Instruction Manual preview
POWER WAH
Бренд: MORLEY Страницы: 2
Brunetti Vanilla Owner'S Manual preview
Vanilla
Бренд: Brunetti Страницы: 2
Mackie MCU Pro Owner'S Manual preview
MCU Pro
Бренд: Mackie Страницы: 17
Doyon SM-200 Installation And Maintenance Manual preview
SM-200
Бренд: Doyon Страницы: 55
Samson SM4 Owner'S Manual preview
SM4
Бренд: Samson Страницы: 12
Philips Harmony DCB8000 Specifications preview
Harmony DCB8000
Бренд: Philips Страницы: 3
Philips MC108C User Manual preview
MC108C
Бренд: Philips Страницы: 18
Philips MC1000 User Manual preview
MC1000
Бренд: Philips Страницы: 17
DAPAudio GIG-124CFX Manual preview
GIG-124CFX
Бренд: DAPAudio Страницы: 24
DAPAudio D2191 Product Manual preview
D2191
Бренд: DAPAudio Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды