BYD M6, Руководство пользователя

Страница: 109 / 227

BYD M6 AUTO Owner’s Manual
Other Equipments 1-101
a walker, obstacle or another
vehicle. You must observe the
area around the vehicle even if
you have a parking vision
system.
y
Don’t use this system if the rear
door is not closed completely.
y
After collision with another
vehicle or any obstacle, there
may be change in the camera
location and orientation. Contact
a BYD service station to check
the camera location and
orientation.
y
Don’t disassemble or modify the
waterproof installation camera.
Otherwise it may not work
properly.
y
If the ambient temperature
changes quickly, this system
may not work properly.
y
If water, snow or mud gets on
the camera, wash it with water
and wipe it clean with a soft
cloth. If the taint, such as oil or
rubber stains, is hard to remove,
please wash it with water and
mild detergent, and then wipe it
clean with a soft cloth.
y
Don’t get any organic solvent,
wax, detergent or window film on
the camera. In case of any stain
of these matters, remove it
immediately.
y
You must look around the
vehicle rather than rely on the
display alone. When the vehicle
is moving, the image may be
blurred, distorted or dark,
especially on a cold day. Be sure
to observe the area around the
vehicle and use the rearview
mirrors when parking.
y
Don't use the parking vision
system when you turn on the
turn signal lights or emergency
flashers. Don’t use the parking
vision system when there is
lights blinking nearby. A blinking
light will cause unstable image
on the display, and in turn affect
your observation and parking, or
even cause an accident.
NOTICE
In the following cases, the image
may not be distinguishable even
though the system is working
normally:
In the dark
y
If the temperature around the
camera is very hot or cold;
y
If the humidity is very high, or if
water drops are stuck on the
lens;
y
If snow or mud is stuck on the
lens;
y
If the lens is scratched or dirty;
y
If the lens is directed at a strong
light source.