BYD M6, Руководство пользователя

Страница: 211 / 227

BYD M6 AUTO Owner’s Manual
Part Maintenance 7-21
If the headlights or other electric
components do not work, check the
fuses. The blown fuses must be
replaced.
1. Turn off the ignition switch and
open the fuse box cover.
Find out which fuse is causing the
problem. The fuse box cover indicates
the name of the circuit for each fuse.
2. Make sure the failed component is
turned off. Pull the suspected fuse
straight out with a puller and check
it. If the fuse has blown, install a
new fuse in place.
a. Check the fuse carefully. If the fuse
wire is broken, the fuse should be
replaced. If you are not sure
whether the fuse is blown, such as
in dim light, you can replace it with
another fuse with the same rating.
b. Never replace a fuse with anything
but another fuse of the rating
indicated on the fuse cover.
If a spare fuse is not available under
emergencies, you can remove the
fuse with the same rating for
unnecessary components, such as
interior lights, and use it as the
temporary replacement fuse.
If a replacement fuse with the same
rating is not available, you can use a
fuse which has a rating slightly lower
than the blown fuse. A replacement
fuse with a lower rating may blow out
quickly, but this doesn’t mean there is
a problem. Install a replacement fuse
with the same rating as soon as
possible, and put back the temporary
replacement fuse in its original place.
You are recommended to keep a
complete set of fuses in the vehicle
for emergency use.
If the new fuse with the same rating
blows out quickly, fault may exist in
the electric system. Contact a BYD
service station to check the vehicle.
CAUTION
y
Never use a fuse with high rating
or anything else as substitute for
a blown fuse. It may cause
severe wring damage and a
possible fire.
Good Blown